John McGrath's Discussions (159)

Discussions Replied To (71) Replies Latest Activity

"Nobody? Someone has to be doing some DIY with these things?"

John McGrath replied Sep 19, 2013 to 3D Hex alternative landing gear/skids

10 Oct 7, 2013
Reply by John McGrath

Developer

"How are you measuring a 10 db gain value?  "

John McGrath replied Sep 6, 2013 to ArduCopter-3.0.1 released!

5021 Feb 18, 2016
Reply by Andrew A

Developer

"There is a envelope on that ground plane to gain though. "

John McGrath replied Sep 5, 2013 to ArduCopter-3.0.1 released!

5021 Feb 18, 2016
Reply by Andrew A

"Probably wont find analog out but you never know. However it can work for sure its n…"

John McGrath replied Sep 5, 2013 to New concept of photography / videoing - New Sony Camera

1 Sep 5, 2013
Reply by John McGrath

Developer

"Biggest mistake you can do is order motors, esc's from that place. Buy from a reputa…"

John McGrath replied Sep 5, 2013 to ArduCopter-3.0.1 released!

5021 Feb 18, 2016
Reply by Andrew A

Developer

"Just wanted to add a positive review of the upgrade. 3DR Hex here with everything lo…"

John McGrath replied Aug 31, 2013 to ArduCopter-3.0.1 released!

5021 Feb 18, 2016
Reply by Andrew A

Developer

"I just looked mine is set to 0. But I see RTL_ALT is set to 3000 I am going to set t…"

John McGrath replied Aug 29, 2013 to ArduCopter-3.0.1 released!

5021 Feb 18, 2016
Reply by Andrew A

Developer

"Ok just did another flight today and decided to do a little FPV. Take off to a loite…"

John McGrath replied Aug 29, 2013 to ArduCopter-3.0.1 released!

5021 Feb 18, 2016
Reply by Andrew A

Developer

"When I installed the upgrade the modified 3DR values shown in the picture above are…"

John McGrath replied Aug 28, 2013 to ArduCopter-3.0.1 released!

5021 Feb 18, 2016
Reply by Andrew A

Developer

"In general no issues with the upgrade but I was just wondering if a guru would look…"

John McGrath replied Aug 28, 2013 to ArduCopter-3.0.1 released!

5021 Feb 18, 2016
Reply by Andrew A

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service