Tim Dickinson's Discussions (111)

Discussions Replied To (94) Replies Latest Activity

"I love how no one cares to help anyone on this site.."

Tim Dickinson replied Jul 27, 2016 to Control mission progression through transmitter knob.

3 Jul 27, 2016
Reply by Gary McCray

"I dont understand what the problem is."

Tim Dickinson replied Jul 27, 2016 to droid planner 3 planning

1 Jul 27, 2016
Reply by Tim Dickinson

"Have you tried calibrating the esc without the apm? "

Tim Dickinson replied Jul 27, 2016 to ESC won't calibrate to APM unless the lower throttle is 900.

8 Oct 17, 2016
Reply by Grzegorz Radziwiłko

"If your motors stopping at the highest throttle might be that your throttle need to…"

Tim Dickinson replied Jul 27, 2016 to ESC won't calibrate to APM unless the lower throttle is 900.

8 Oct 17, 2016
Reply by Grzegorz Radziwiłko

"Well you should start off with a drone.. Second a github account... We need more i…"

Tim Dickinson replied Jul 26, 2016 to command prompts

1 Jul 26, 2016
Reply by Tim Dickinson

"Anyone?"

Tim Dickinson replied Jul 25, 2016 to Control mission progression through transmitter knob.

3 Jul 27, 2016
Reply by Gary McCray

"You didnt say what motor failed. I have the same gimbal these are the motors Motor t…"

Tim Dickinson replied Jul 20, 2016 to Low Cost, 3-Axis Gimbal--- Opinions/Experience Needed

3 Jul 20, 2016
Reply by Tim Dickinson

"I would go with the Storm32 gimbal. It has nice integration with the pixhawk. If onl…"

Tim Dickinson replied Jul 20, 2016 to Low Cost, 3-Axis Gimbal--- Opinions/Experience Needed

3 Jul 20, 2016
Reply by Tim Dickinson

"The 11"x4.7 props might be under powered for that size battery. I suspect the "2.5kg…"

Tim Dickinson replied Jul 16, 2016 to Advice Needed for F450 Custom Build

1 Jul 16, 2016
Reply by Tim Dickinson

"Have you calibrated the IMU? I might be that the IMU is offset by one way or another…"

Tim Dickinson replied Jul 16, 2016 to Very new to building drones. Need help

1 Jul 16, 2016
Reply by Tim Dickinson

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service