Keith S's Discussions (70)

Discussions Replied To (58) Replies Latest Activity

"Randall, I saw your post and thought this might help. I'm using 1.3Ghz for video, 90…"

Keith S replied Apr 16, 2012 to Video and Telemetry

1 Apr 16, 2012
Reply by Keith S

"You're in, but you need to share the story ;-)"

Keith S replied Apr 14, 2012 to Warning ! Do not try this.

20 May 2, 2012
Reply by Dan Ho

"Nice helpful information! Thanks guys, I'll give that a try once the wind lets up he…"

Keith S replied Apr 14, 2012 to Tuning loiter

16 Jul 31, 2012
Reply by Project Nadar

"John, Sounds great!  Let me know how it goes. Keith"

Keith S replied Apr 14, 2012 to Missing APM board component . Diode?

23 Apr 17, 2012
Reply by John Campen

"Soren, That's a great simple idea! Like an "idle-up"."

Keith S replied Apr 14, 2012 to Warning ! Do not try this.

20 May 2, 2012
Reply by Dan Ho

"Just don't forget you can't power everything from the USB! And I'd be concerned conn…"

Keith S replied Apr 13, 2012 to Missing APM board component . Diode?

23 Apr 17, 2012
Reply by John Campen

"That would work! It's a little bit larger, SMB instead of SMA. Tiny bit longer 4.3mm…"

Keith S replied Apr 13, 2012 to Missing APM board component . Diode?

23 Apr 17, 2012
Reply by John Campen

"You could short the diode position with a jumper wire, then the rx side would power…"

Keith S replied Apr 13, 2012 to Missing APM board component . Diode?

23 Apr 17, 2012
Reply by John Campen

"Do you have a picture of your board? I'd like to see what you have to work with, i.e…"

Keith S replied Apr 13, 2012 to Missing APM board component . Diode?

23 Apr 17, 2012
Reply by John Campen

"You can find the schematic here : http://www.sparkfun.com/products/10294 it is on pa…"

Keith S replied Apr 13, 2012 to Missing APM board component . Diode?

23 Apr 17, 2012
Reply by John Campen

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service