Paul G.'s Discussions (32)

Discussions Replied To (29) Replies Latest Activity

"if you have the air speed sensor why are you estimating it ?"

Paul G. replied Nov 18, 2010 to APM all-in

6 Nov 19, 2010
Reply by Doug Weibel

"or mount the landing gear on the motor firewall - if your converting to electric you…"

Paul G. replied Nov 14, 2010 to Mini telemaster

12 Nov 14, 2010
Reply by Paul G.

"That first motor you list will be just fine, along with the 6s voltage. You may need…"

Paul G. replied Nov 14, 2010 to Looking for some feedback on a electric conversion

2 Nov 14, 2010
Reply by Paul G.

"fairly good reference on the subject here http://paparazzi.enac.fr/wiki/RC_Receiver…"

Paul G. replied Nov 13, 2010 to PPM Input in UAV Dev Board (Coded And working!!!! with Failsafe!!!!)

19 Nov 21, 2010
Reply by Riccardo Kuebler

"Actually each servo pulse should be between 1.0 and 2.0 ms nominal, expect down to 0…"

Paul G. replied Nov 12, 2010 to PPM Input in UAV Dev Board (Coded And working!!!! with Failsafe!!!!)

19 Nov 21, 2010
Reply by Riccardo Kuebler

"you may be better off with a quad platform because a glider will need clear space to…"

Paul G. replied Nov 9, 2010 to UAV and FPV based horse counting

1 Nov 9, 2010
Reply by Paul G.

"3) you will need actual video tx and rx, xbee's are for data - not video. 4) in theo…"

Paul G. replied Nov 7, 2010 to Fully autonomous indoor quad with video transmission

10 Jul 9, 2016
Reply by Marvelmind Robotics

"The short answer you cant. The long answer, if the autopilot can do the v-tail mixin…"

Paul G. replied Nov 4, 2010 to funny problem, "Nose wheel"

4 Nov 5, 2010
Reply by diego colonnello

"Like the top picture above - the tail looks like an "A" rather than a "V"."

Paul G. replied Nov 1, 2010 to Help me decide what is my best choce...

5 Nov 2, 2010
Reply by diego colonnello

"A tail is better aerodynamically, also gives you more clearance as the aircraft rota…"

Paul G. replied Oct 31, 2010 to Help me decide what is my best choce...

5 Nov 2, 2010
Reply by diego colonnello

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service