Paul G.'s Discussions (32)

Discussions Replied To (29) Replies Latest Activity

"Be careful, the 868's have a duty cycle restriction that's a pain to get around."

Paul G. replied Oct 29, 2010 to xbee - definitive set-up

9 Oct 29, 2010
Reply by James Turner

"There are many places to have boards made, really depends on how fast and what quali…"

Paul G. replied Oct 22, 2010 to Super OSD; and how to manufacture it

13 Feb 7, 2011
Reply by Krystal Austin

"There is an (unshown) ground plane but its removed under the two mag modules, with t…"

Paul G. replied Aug 6, 2010 to On board USB programming ? Built in MMC / SD card logging ? I'd like to hear your thoughts.

3 Aug 6, 2010
Reply by Paul G.

"Honestly I would start with changing the firmware on this http://store.diydrones.co…"

Paul G. replied Jul 2, 2010 to All in one rs232 Autopilot Failsafe Servo multiplexer/controller/reader

10 Jul 6, 2010
Reply by Abe

"Easily doable - did this a long time ago with a 12 channel servo control that read a…"

Paul G. replied Jul 2, 2010 to All in one rs232 Autopilot Failsafe Servo multiplexer/controller/reader

10 Jul 6, 2010
Reply by Abe

T3

"Hi Thomas Simple answer on the gyro's is bandwidth :) we'll that's my educated gues…"

Paul G. replied Jul 1, 2010 to Automatic nulling of magnetometer offsets

96 Apr 28, 2012
Reply by William Premerlani

T3

"Looks really good - about 6 months ago I started doing almost exactly that - well sa…"

Paul G. replied Jul 1, 2010 to Automatic nulling of magnetometer offsets

96 Apr 28, 2012
Reply by William Premerlani

T3

"1. We want to produce another major release of MatrixPilot for the existing UDB befo…"

Paul G. replied Jun 29, 2010 to Automatic nulling of magnetometer offsets

96 Apr 28, 2012
Reply by William Premerlani

"If this is a normal RC servo then this is not how they are controlled at all. RC se…"

Paul G. replied Jun 8, 2010 to Troubleshooting Odd Servo Behavior

7 Jun 9, 2010
Reply by Ebola Stravinsky

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service