Mike Knott's Discussions (45)

Discussions Replied To (29) Replies Latest Activity

"If you're only running a 1kg payload, you're severely overpowered. My plan with this…"

Mike Knott replied Feb 4, 2015 to My Heavy Lift U8, Pixhawk - Sweep heads South

25 Feb 5, 2015
Reply by Pablo Neira

"I have an X8 that weighs about the same, I ended up having to add 7kg to make the sy…"

Mike Knott replied Feb 4, 2015 to My Heavy Lift U8, Pixhawk - Sweep heads South

25 Feb 5, 2015
Reply by Pablo Neira

"Pablo, I found with my 170Kv U8's I needed to add more weight before the system reac…"

Mike Knott replied Feb 4, 2015 to My Heavy Lift U8, Pixhawk - Sweep heads South

25 Feb 5, 2015
Reply by Pablo Neira

"When your radio is ON, you want your minimum throttle value (Ch3) to be above the FS…"

Mike Knott replied Dec 5, 2014 to APM 2.6 Wont Arm Need 3D Fix

13 Oct 1, 2019
Reply by Houss Pin

"If you go to the links I posted in my first reply, all of your questions will be ans…"

Mike Knott replied Dec 5, 2014 to APM 2.6 Wont Arm Need 3D Fix

13 Oct 1, 2019
Reply by Houss Pin

"Your throttle failsafe is set too high, check your RC calibration. This is a prearm…"

Mike Knott replied Dec 5, 2014 to APM 2.6 Wont Arm Need 3D Fix

13 Oct 1, 2019
Reply by Houss Pin

"With that high voltage, are you sure you need 70A ESCs? I couldn't see you drawing t…"

Mike Knott replied Oct 22, 2014 to My Heavy Lift U8, Pixhawk - Sweep heads South

25 Feb 5, 2015
Reply by Pablo Neira

"As far as I know, this code is still in beta. It works, but it needs to be tweaked.…"

Mike Knott replied Oct 10, 2014 to Antenna Tracker v0.1

4 Oct 10, 2014
Reply by Charles lakins

"Once I have some free time, I'm looking into a chassis like this: https://www.sparkf…"

Mike Knott replied Sep 26, 2014 to Tank Drones

6 Oct 9, 2015
Reply by Tim Allan

"Follow this guide for proper soldering: http://makezine.com/2012/02/28/how-to-splice…"

Mike Knott replied Sep 17, 2014 to Soldering motor cable

18 Sep 18, 2014
Reply by bill bergovoy

RSS

© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service