Muthanna A. Attyah's Discussions (16)

Discussions Replied To (15) Replies Latest Activity

"You will need gyroscope to detect rotation and accelerometer to detect acceleration;…"

Muthanna A. Attyah replied Jun 29, 2012 to what is the best sensor for my project "Gyroscope or accelometer" ?

1 Jun 29, 2012
Reply by Muthanna A. Attyah

"Hi,   I'm not aware of anybody but dual sensors is mentioned in research paper re op…"

Muthanna A. Attyah replied Jun 23, 2012 to APM2 SPI and Optical Flow Sensor

8 Jun 23, 2012
Reply by Muthanna A. Attyah

"Hi Jerry, Spacing should be 2.0mm, you can use this cable."

Muthanna A. Attyah replied Jun 23, 2012 to APM2 SPI and Optical Flow Sensor

8 Jun 23, 2012
Reply by Muthanna A. Attyah

"It seems that the only way as of now is to do the soldering on APM2, it is mentioned…"

Muthanna A. Attyah replied Jun 16, 2012 to APM2 SPI and Optical Flow Sensor

8 Jun 23, 2012
Reply by Muthanna A. Attyah

"Just to update on this issue, I purchased a new APM2 board (2.4.1) and it was workin…"

Muthanna A. Attyah replied Jun 14, 2012 to No signal on APM2.0 UART0 and XBEE issue

33 Jan 29, 2013
Reply by AS

"Hello, Here is a snapshot of the LEDs related code where you can see the name of pi…"

Muthanna A. Attyah replied Jun 8, 2012 to Leds in 2.6 and camera roll trouble

3 Nov 30, 2012
Reply by Geir Engebakken

"     "

Muthanna A. Attyah replied May 25, 2012 to Send me pictures of your workshop

58 Oct 1, 2012
Reply by Marty LaBelle

"No signal at all from UART0/2, I tried using both FTDI cable with serial testing ske…"

Muthanna A. Attyah replied Apr 28, 2012 to No signal on APM2.0 UART0 and XBEE issue

33 Jan 29, 2013
Reply by AS

"Yes, traces were there before I solder it."

Muthanna A. Attyah replied Apr 28, 2012 to No signal on APM2.0 UART0 and XBEE issue

33 Jan 29, 2013
Reply by AS

"Chris, UART0 is as shown, no need to change the wiki if the issue is not common. "

Muthanna A. Attyah replied Apr 28, 2012 to No signal on APM2.0 UART0 and XBEE issue

33 Jan 29, 2013
Reply by AS

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service