Matt's Discussions (37)

Discussions Replied To (32) Replies Latest Activity

"Don't trim the radio.  Setup your flight controller properly and allow it to manage…"

Matt replied Oct 23, 2014 to Struggling to get my first copter off the ground. So close though..

5 Oct 23, 2014
Reply by Matt

"Yeah; eCalc isn't perfect but it gives a good indication on performance.  I ran the…"

Matt replied Oct 15, 2014 to Throttle "Dead Stick" Position in Loiter

12 Dec 20, 2014
Reply by Sandy Sound

"Just to add to this, if you can't match up Ecalc to your specs without a premium acc…"

Matt replied Oct 12, 2014 to Throttle "Dead Stick" Position in Loiter

12 Dec 20, 2014
Reply by Sandy Sound

"Sandy, Your copter is significantly underpowered.  You'll need to improve its lift…"

Matt replied Oct 12, 2014 to Throttle "Dead Stick" Position in Loiter

12 Dec 20, 2014
Reply by Sandy Sound

"I know that you're confident that it's not an arming issue, but what you're describ…"

Matt replied Aug 12, 2014 to I'm so stuck. Can't test motors, can't arm motors.

25 Oct 18, 2014
Reply by Michael Visser

"Are you sure the error message is "command denied by ardupilot"? I've had a look at…"

Matt replied Aug 12, 2014 to I'm so stuck. Can't test motors, can't arm motors.

25 Oct 18, 2014
Reply by Michael Visser

"Hi Jeff, I'm by no means an expert but a brief look at your log seemed to show some…"

Matt replied Aug 12, 2014 to pixhawk mission went real bad and i dont know why

3 Aug 14, 2014
Reply by TG

"Hi Brian, What firmware version are you running on the APM?"

Matt replied Aug 12, 2014 to I'm so stuck. Can't test motors, can't arm motors.

25 Oct 18, 2014
Reply by Michael Visser

"Hi all, Does anyone have any thoughts on how to debug this? Many thanks."

Matt replied Aug 5, 2014 to Negative relative alitude at launch

1 Aug 5, 2014
Reply by Matt

"Ideally you want your 'coptor's hover at 50% on the throttle stick.  You can achieve…"

Matt replied Aug 2, 2014 to Best Approach to throttle hover

4 Jan 3, 2017
Reply by Jason Greening

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service