Bill Salopek's Discussions (118)

Discussions Replied To (90) Replies Latest Activity

"Thanks for pointing that out to me...for whatever reason, I did not know there was a…"

Bill Salopek replied Sep 27, 2013 to APM applied full pitch back and full throttle after engaging loiter

31 Mar 28, 2014
Reply by Hans-Jochen Kelle

"R... Sorry for kinda "flying off into nowhere unexpectedly"  :)   But you are saying…"

Bill Salopek replied Sep 26, 2013 to APM applied full pitch back and full throttle after engaging loiter

31 Mar 28, 2014
Reply by Hans-Jochen Kelle

"Rob...for me, happened three times in a row (after having no problems with earlier f…"

Bill Salopek replied Sep 26, 2013 to APM applied full pitch back and full throttle after engaging loiter

31 Mar 28, 2014
Reply by Hans-Jochen Kelle

"Has anyone tried reverting to V2.9x to see if the loiter problem goes away?  I would…"

Bill Salopek replied Sep 26, 2013 to loiter mode causes copter to drift away fast

20 Jan 18, 2016
Reply by Gabor H

"Same problem here (APM 2.5, v3.0.1)...switching to LOITER or RTL makes the aircraft…"

Bill Salopek replied Sep 25, 2013 to loiter mode causes copter to drift away fast

20 Jan 18, 2016
Reply by Gabor H

"Same thing appears to be happening to a lot of people...RTL and LOITER are making th…"

Bill Salopek replied Sep 25, 2013 to Please help verify cause of RTL

20 Sep 26, 2013
Reply by Randy

"I am having the same kind of problems with RTL and LOITER...the hexacopter just want…"

Bill Salopek replied Sep 25, 2013 to Bad crash in 3.0.1 - RTL full throttle into ground

9 Sep 26, 2013
Reply by Randy

"Same thing for me...switching to LOITER or RTL, and the hex flies away...FAST."

Bill Salopek replied Sep 25, 2013 to Arducopter v3,01 fly away with no control (software glitch?)

41 Nov 11, 2013
Reply by criro1999

"I had the same thing happen...APM 2.5, v3.0.1...when switching from stabilize to RTL…"

Bill Salopek replied Sep 25, 2013 to Arducopter v3,01 fly away with no control (software glitch?)

41 Nov 11, 2013
Reply by criro1999

"APM 2.5, hex, x config, v3.0.1. I had a very similar problem today...flying along in…"

Bill Salopek replied Sep 25, 2013 to 3DR Y6 motors cutting out, falling fast. Video (crazy, lucky save) included

9 Sep 26, 2013
Reply by Raph

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service