Xerravon's Discussions (236)

Discussions Replied To (232) Replies Latest Activity

"Hi, I finally solved this, it was a parameter I had not been aware of, SYSID_MYGCS i…"

Xerravon replied Sep 9, 2015 to Joystick problems first time setup

1 Sep 9, 2015
Reply by Xerravon

"Hi, Did anyone figure this out?  I have the same problem with a X52, buttons work bu…"

Xerravon replied Sep 6, 2015 to Need help using joystick to control Arducopter

19 Oct 26, 2016
Reply by Anwar Ali Khan

"Hi,that seemed to do it. I found one motor had moved a little, very small amount, I…"

Xerravon replied Aug 18, 2014 to rear left motors (number 2) lift when Yawing

3 Aug 18, 2014
Reply by Xerravon

"Hi,I will check that again, it is using round CF tubes and I replaced the ones that…"

Xerravon replied Aug 18, 2014 to rear left motors (number 2) lift when Yawing

3 Aug 18, 2014
Reply by Xerravon

Developer

"Paul, thanks for posting this. I had been looking for one that could handle 6S. I h…"

Xerravon replied Mar 31, 2014 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8, 2014
Reply by Randy

Developer

"I dont know how easy it would be but couldn't he put an inverter between pin 3 and t…"

Xerravon replied Mar 31, 2014 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8, 2014
Reply by Randy

Developer

"Hi, As far as I know, the old external compass will not work on Pixhawk. I know the…"

Xerravon replied Mar 24, 2014 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8, 2014
Reply by Randy

Developer

"Hi, I kind of figured that.  Just wanted to be sure.  I just checked the last apm25…"

Xerravon replied Mar 17, 2014 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8, 2014
Reply by Randy

Developer

"Hi, I was just thinking, what about the Pixhawk boards?   should they be batt power…"

Xerravon replied Mar 17, 2014 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8, 2014
Reply by Randy

Developer

"Hi, Yeah, mine are all 3dr boards. thanks again, John"

Xerravon replied Mar 16, 2014 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8, 2014
Reply by Randy

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service