Josh Potter's Discussions (349)

Discussions Replied To (325) Replies Latest Activity

"I'm also having this problem using ppm, but since I can't adjust the frame rate on a…"

Josh Potter replied Feb 5, 2014 to APM2.5 3.1 servo twitch

32 Feb 24, 2014
Reply by Rob_Lefebvre

Developer

"I know very little about hardware design so I really have no comment on that, but we…"

Josh Potter replied Jan 31, 2014 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8, 2014
Reply by Randy

Developer

"I was able to solder the replacement chip onto the board and now my everything is wo…"

Josh Potter replied Jan 29, 2014 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8, 2014
Reply by Randy

Developer

"I just found out the voltage regulator in my APM 2.5.2 is bad.  I know i've never pl…"

Josh Potter replied Jan 26, 2014 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8, 2014
Reply by Randy

"This is fantastic work.  I was getting ready to build a separate PWM to analog conve…"

Josh Potter replied Oct 3, 2013 to No serious problems just some questions RSSI / ESC etc

19 Oct 3, 2013
Reply by Josh Potter

"Vitali, The APM accepts an analog RSSI input by default (it can't do PWM, hence thi…"

Josh Potter replied Oct 3, 2013 to No serious problems just some questions RSSI / ESC etc

19 Oct 3, 2013
Reply by Josh Potter

"Awesome; thanks for the information Brent."

Josh Potter replied Sep 14, 2013 to Arduplane without a compass?

3 Sep 17, 2013
Reply by wolfgang

"I had the same problem.  I then took the chip off however that doesn't allow my exte…"

Josh Potter replied Sep 14, 2013 to ArduPilot Compass

7 Apr 11, 2015
Reply by Marnix Verschraegen

"Well it turns out my trace wasn't cut so when I removed the chip I now see the corre…"

Josh Potter replied Sep 12, 2013 to Disabling the internal compass on 2.0 APM hardware by removing the HMC5883L

3 Sep 12, 2013
Reply by Josh Potter

"If you haven't already, try running the CLI baro test and just walk around with the…"

Josh Potter replied Sep 12, 2013 to APM 2.5 Bad Altimeter?

4 Sep 12, 2013
Reply by Caleb Scott

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service