UAgroV's Discussions (14)

Discussions Replied To (13) Replies Latest Activity

"Hi Y, reading this: http://diydrones.com/profiles/blogs/using-the-5hz-locosys-gps-wi…"

UAgroV replied Feb 23, 2012 to changing baud rate of the GPS

1 Feb 23, 2012
Reply by UAgroV

Developer

"Yes i have, but they are emiting erratics beeps sometimes and 3 beeps other times (l…"

UAgroV replied Feb 22, 2012 to ArduCopter 2.4 released

1085 Mar 18, 2012
Reply by Dave C

Developer

"Hi Marco, should the motor test works with quads? i was geting crazy here. Thanks fo…"

UAgroV replied Feb 22, 2012 to ArduCopter 2.4 released

1085 Mar 18, 2012
Reply by Dave C

"Hi Adam, First, ensure you are pulging the wires in the rigth way, allways +5v (red…"

UAgroV replied Feb 21, 2012 to APM2 will not power from output rail

12 Mar 7, 2012
Reply by Cody O.

"hi Chris, looking at the schematics, you can find Hotel V1.0 here: https://store.diy…"

UAgroV replied Feb 21, 2012 to IMU shield repair advice needed

3 Mar 11, 2012
Reply by Chris Reinhardt

"So, its seems my brain was the only thing rolled over here, I was scared of been dam…"

UAgroV replied Feb 17, 2012 to Inverted Roll Problem

2 Feb 17, 2012
Reply by UAgroV

"Hi Onur, If you leave your jumper off, the only way you could power your board would…"

UAgroV replied Feb 15, 2012 to Powering the Ardupilot Board

37 Aug 20, 2018
Reply by Hamza fayaz

"Hi Al, you must use and older software for the test or upgrade to 2500. If you got p…"

UAgroV replied Feb 14, 2012 to quad keep spinning

18 Feb 14, 2012
Reply by UAgroV

"No its doesn`t, as refered at the end of this document: http://code.google.com/p/ard…"

UAgroV replied Feb 14, 2012 to Powering the Ardupilot Board

37 Aug 20, 2018
Reply by Hamza fayaz

"Hi Daniel, Setting the jumper off, you will separate the output rail from the rest.…"

UAgroV replied Feb 13, 2012 to Powering the Ardupilot Board

37 Aug 20, 2018
Reply by Hamza fayaz

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service