Jeff E's Discussions (143)

Discussions Replied To (137) Replies Latest Activity

Developer

"no particular reason, except I wanted to fly immediately this morning. I just arrive…"

Jeff E replied Oct 21, 2011 to Arducopter 2.0.48/49

400 Feb 13, 2012
Reply by estebanflyer

Developer

"Had some better success with 2.0.48 on loiter and ALT_hold(baro only) but still need…"

Jeff E replied Oct 21, 2011 to Arducopter 2.0.48/49

400 Feb 13, 2012
Reply by estebanflyer

Developer

"In all honesty this is not the best way to improve on the cam stab but it kinda less…"

Jeff E replied Oct 15, 2011 to Arducopter 2.0.48/49

400 Feb 13, 2012
Reply by estebanflyer

Developer

"Had another go and was able to go loiter(finally) for my frame with gopro onboard. I…"

Jeff E replied Oct 15, 2011 to Arducopter 2.0.48/49

400 Feb 13, 2012
Reply by estebanflyer

"I have that same issue with the xbee regulated board. Soldered to much the pins got…"

Jeff E replied Oct 14, 2011 to Problem compiling Ardustation2

14 Feb 13, 2012
Reply by Heino R. Pull

Developer

"Hit pay dirt....got some good PIDs and stable was really good. Also managed to get A…"

Jeff E replied Oct 14, 2011 to Arducopter 2.0.48/49

400 Feb 13, 2012
Reply by estebanflyer

Developer

"Just tested this earlier on 2 non-ardu frame / not default PIDs - stable was good bu…"

Jeff E replied Oct 13, 2011 to Arducopter 2.0.48/49

400 Feb 13, 2012
Reply by estebanflyer

"I have been always a fan of diorama. Cool vid"

Jeff E replied Oct 10, 2011 to Octokopter Video - Test Flying

5 Oct 10, 2011
Reply by Jeff E

Developer

"@Balloon on my Fyetech X4 I flew default PID was great hold but was a bit sluggish s…"

Jeff E replied Oct 9, 2011 to 2.0.45

162 Oct 16, 2011
Reply by Olivier ADLER

Developer

"After a few more flights on 2.0.47, stab/rate PI is getting pretty spot on but still…"

Jeff E replied Oct 9, 2011 to 2.0.45

162 Oct 16, 2011
Reply by Olivier ADLER

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service