Phil P's Discussions (59)

Discussions Replied To (45) Replies Latest Activity

"It's unlikely it vibrated loose. It was between some rubber bands and some foam. The…"

Phil P replied Jun 19, 2015 to crashed today! don't know why!

5 Jun 19, 2015
Reply by Gustav Kuhn

"I had some 1/2 inch foam under the APM for dampening vibrations. "

Phil P replied Jun 19, 2015 to crashed today! don't know why!

5 Jun 19, 2015
Reply by Gustav Kuhn

"Thanks for that. I decreased from 30 to 28Db. Jitter decreased substantially. Will t…"

Phil P replied Jun 9, 2015 to RFD900 makes servos jitter

18 Jun 12, 2015
Reply by kolin

"Brian that's interesting. I will give that a go. Maybe time to pull out my oscillosc…"

Phil P replied Jun 9, 2015 to RFD900 makes servos jitter

18 Jun 12, 2015
Reply by kolin

"My pixhawk is in the mail. So far I have only tried APM"

Phil P replied Jun 8, 2015 to RFD900 makes servos jitter

18 Jun 12, 2015
Reply by kolin

"I have moved it as much as I can. The jitter never goes away completely unless I dis…"

Phil P replied Jun 7, 2015 to RFD900 makes servos jitter

18 Jun 12, 2015
Reply by kolin

"Anybody?"

Phil P replied Oct 20, 2013 to Joystick with FBWA and FBWB modes.

3 Jan 26, 2016
Reply by Chris Khosravi

"If you mix channel 5 and 6 you will have 4 modes. Then if you switch off your transm…"

Phil P replied Oct 17, 2013 to DX6I Flight Modes

3 Nov 19, 2013
Reply by Stein Rasmussen

"Yes you definitely need one. There is a whole lot of tuning you need to do before fl…"

Phil P replied Oct 16, 2013 to Do you need a Transmitter/Receiver with APM 2.6?

1 Oct 16, 2013
Reply by Phil P

"Here is a HUUUGE servo but they don't advertise the price. It's POA which typically…"

Phil P replied Oct 16, 2013 to servos and actuators for larger craft

7 Jun 22, 2015
Reply by Ron Nielsen

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service