Todd's Discussions (59)

Discussions Replied To (21) Replies Latest Activity

"Still seeing lousy flight times, probably due to weight.  Flip with no battery weigh…"

Todd replied Oct 29, 2014 to Failsafe Triggered?

8 Oct 29, 2014
Reply by Todd

"Fixed the voltage issue.  Replaced cable from 3DR Power module to power on Pixhawk.…"

Todd replied Oct 29, 2014 to Failsafe Triggered?

8 Oct 29, 2014
Reply by Todd

"Voltage and current measuring not ok. Hooking the quad to apm and adding a 3.5 mAh b…"

Todd replied Oct 25, 2014 to Failsafe Triggered?

8 Oct 29, 2014
Reply by Todd

"Voltage seems ok.  Had a look at at my ESC settings and they seem ok too. I did chan…"

Todd replied Oct 22, 2014 to Failsafe Triggered?

8 Oct 29, 2014
Reply by Todd

"Thanks Nathaniel.  No, I hadn't seen that video.  I'll try calibrating the voltage/c…"

Todd replied Oct 20, 2014 to Failsafe Triggered?

8 Oct 29, 2014
Reply by Todd

"Thanks for looking Nathaniel. One battery is about 6 months old and one is about 3 m…"

Todd replied Oct 19, 2014 to Failsafe Triggered?

8 Oct 29, 2014
Reply by Todd

"Where did I put my tinfoil hat....."

Todd replied Oct 7, 2014 to Can This Be True.....Lets hope the DOTS dont connect.......

56 Oct 8, 2014
Reply by Euan Ramsay

"Would one like this work? Quanum Q 2D Seems like the controller could be easily move…"

Todd replied Sep 29, 2014 to GoPro Gimbal Recommendations

1 Sep 29, 2014
Reply by Todd

"Thanks Johann.  Connecting by USB or telemetry I wasn't getting the Mandatory Setup…"

Todd replied Sep 20, 2014 to Uploading to Pixhawk from APM

2 Sep 20, 2014
Reply by Todd

"That should be possible.  The mission is loaded onto Iris so it should just continue…"

Todd replied Sep 9, 2014 to Iris+ Arrives

46 Sep 10, 2014
Reply by Aaron Curtis

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service