Jeroen van Bemmel's Discussions (11)

Discussions Replied To (9) Replies Latest Activity

Developer

"I've checked out the graphs and found this.. it looks like INAV is detecting much bi…"

Jeroen van Bemmel replied Mar 5, 2013 to ArduCopter 2.9 / 2.9.1 released

3738 May 7, 2014
Reply by Hangingpixels

Developer

"I'll rebalance and reset my quad settings. I have only changed some recommended sett…"

Jeroen van Bemmel replied Mar 5, 2013 to ArduCopter 2.9 / 2.9.1 released

3738 May 7, 2014
Reply by Hangingpixels

Developer

"500 all other settings:  YSID_SW_MREV: 120SYSID_SW_TYPE: 10SYSID_THISMAV: 1SYSID_MY…"

Jeroen van Bemmel replied Mar 5, 2013 to ArduCopter 2.9 / 2.9.1 released

3738 May 7, 2014
Reply by Hangingpixels

Developer

"I am expierincing problems with Alt-hold too.. I have a HAL quad with 1400kV on 4S a…"

Jeroen van Bemmel replied Mar 5, 2013 to ArduCopter 2.9 / 2.9.1 released

3738 May 7, 2014
Reply by Hangingpixels

"actually, for me it helped to put the throttle stick down before you confirm the new…"

Jeroen van Bemmel replied Oct 4, 2012 to motors keep beeping at me

9 Oct 4, 2012
Reply by Al Kilgore

"I managed to get it working through changing com port settings in de device settings…"

Jeroen van Bemmel replied Oct 2, 2012 to Upload succeeded but verify failed....

18 May 15, 2015
Reply by Vitalii S.

"reverse the output in the planner or config settings."

Jeroen van Bemmel replied Sep 28, 2012 to cameran stablization

1 Sep 28, 2012
Reply by Jeroen van Bemmel

"ok, I have a working solution now: i've been able to load and verify succesfully by…"

Jeroen van Bemmel replied Sep 25, 2012 to Upload succeeded but verify failed & Mission Planner fails to connect - Serial link isn't fast enough

9 Jul 5, 2013
Reply by Steve Monro

"Same here, just received my APM 2.5 and get the verify failed error. Using 1.2.12 ma…"

Jeroen van Bemmel replied Sep 24, 2012 to Upload succeeded but verify failed & Mission Planner fails to connect - Serial link isn't fast enough

9 Jul 5, 2013
Reply by Steve Monro

RSS

© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service