Arshish Maneckji's Discussions (100)

Discussions Replied To (82) Replies Latest Activity

"Hi, Can I use my own Castle Creation 10A BEC with the Current sensor? Its quite a h…"

Arshish Maneckji replied Feb 24, 2016 to Safety First: 100A & 200A Hall Sensor with BEC for Pixhawk / APM

116 Feb 27
Reply by Darshan Jain

"Thanks Paul.. Ill try try this today."

Arshish Maneckji replied Feb 23, 2016 to ublox M8N GPS - doesn't store settings

24 Feb 23, 2016
Reply by Arshish Maneckji

"I had the same problem guys with my M8N Drotek GPS. Settings I manually changed neve…"

Arshish Maneckji replied Feb 23, 2016 to ublox M8N GPS - doesn't store settings

24 Feb 23, 2016
Reply by Arshish Maneckji

"If you are setting the voltage manually then the voltage divider will automatically…"

Arshish Maneckji replied Feb 14, 2016 to Voltage divider help

3 Feb 14, 2016
Reply by Arshish Maneckji

"I had a very similar problem with my M8N & Pixhawk Here is what I noticed: 1.…"

Arshish Maneckji replied Feb 14, 2016 to APM Copter 3.3.2 help with Compass variance

14 Feb 22, 2016
Reply by Michal Paal

"Just my 2 cents. Form the picture you posted the external compass wires run very cl…"

Arshish Maneckji replied Feb 14, 2016 to 4s to 6s power system - compass variance

9 Feb 15, 2016
Reply by Chris Maier

"Thanks James... That clarifies it."

Arshish Maneckji replied Feb 14, 2016 to 1% Compassmot interference BUT high offset values

6 Feb 14, 2016
Reply by Arshish Maneckji

"I believe that if the voltage indicated in mission planner is incorrect then you nee…"

Arshish Maneckji replied Feb 14, 2016 to Voltage divider help

3 Feb 14, 2016
Reply by Arshish Maneckji

"Thanks for replying Craig. Firstly my Config: 1. 650 Quad CF Frame 2. RotorGeeks 3…"

Arshish Maneckji replied Feb 13, 2016 to What's the correct approach to get support from 3RD / DIYDrones

4 Feb 16, 2016
Reply by Derek

"Ok. I think I understand. Does that mean that if I mount the compass exactly above…"

Arshish Maneckji replied Feb 10, 2016 to 1% Compassmot interference BUT high offset values

6 Feb 14, 2016
Reply by Arshish Maneckji

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service