Patrick Leschinski's Discussions (26)

Discussions Replied To (21) Replies Latest Activity

"Looks like they're set at power level 20 (full) and ECC is turned on...I did notice…"

Patrick Leschinski replied Dec 28, 2014 to 915MHz Telemetry cuts out... any ideas?

13 Feb 1, 2015
Reply by Patrick Leschinski

"Thanks for the quick response!I'm using the stock antennae (which look exactly the s…"

Patrick Leschinski replied Dec 28, 2014 to 915MHz Telemetry cuts out... any ideas?

13 Feb 1, 2015
Reply by Patrick Leschinski

"That sounds like a short circuit to me. Red wire in the middle, yeah?"

Patrick Leschinski replied Nov 19, 2014 to Max power through telemetry port on APM

8 Nov 19, 2014
Reply by Patrick Leschinski

"https://code.google.com/p/ardupilot-mega/wiki/ConfigFilesGo into configuration/tunin…"

Patrick Leschinski replied Nov 18, 2013 to Arduplane RTL Throttle Setting

7 Nov 18, 2013
Reply by Tim Arnold

"Hein is right.RTL, Circle, Loiter, and Auto won't run the motor unless the aircraft…"

Patrick Leschinski replied Nov 18, 2013 to Arduplane RTL Throttle Setting

7 Nov 18, 2013
Reply by Tim Arnold

"Never mind. I was trying to solve this problem for a week, and like always, I solved…"

Patrick Leschinski replied Nov 18, 2013 to Throttle cuts in Loiter, Auto, RTL etc.

4 Mar 8, 2014
Reply by Jason McCarthy

"If you level the accelerometers under INITIAL SETUP, this will set the horizon at th…"

Patrick Leschinski replied Nov 17, 2013 to Mounting inclination of APM board

2 Nov 18, 2013
Reply by Assaf Weiss

"I'm having a similar problem, but mine works fine on the bench. It's only once I tak…"

Patrick Leschinski replied Nov 17, 2013 to Arduplane RTL Throttle Setting

7 Nov 18, 2013
Reply by Tim Arnold

"@Richard KennedyThe 3DR AS datasheet states that the error of the instrument reduces…"

Patrick Leschinski replied Nov 17, 2013 to Airspeed sensor causes altitude drop in RTL

17 Nov 17, 2013
Reply by Patrick Leschinski

"Mmm, I haven't yet heard anyone complimentary of 3DR's service. Gosh, I've gone thro…"

Patrick Leschinski replied Sep 27, 2013 to Brushless Gimbal Controller Powering APM2.5

9 Dec 3, 2014
Reply by Sr pilot

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service