Luc Maximilien's Discussions (169)

Discussions Replied To (129) Replies Latest Activity

"A closer look to Log show that at minute 9 and 19 just before the crash or saying a…"

Luc Maximilien replied Aug 29, 2016 to After 19 minutes in Loiter ,150° Yaw rotation and went gently down vvithout responding to radio sticks

9 Aug 30, 2016
Reply by Luc Maximilien

"Thanks for reply Hugues.I do not think it is a battery issue.Today on a twin copter…"

Luc Maximilien replied Aug 28, 2016 to After 19 minutes in Loiter ,150° Yaw rotation and went gently down vvithout responding to radio sticks

9 Aug 30, 2016
Reply by Luc Maximilien

"I found something very strange: Pixhawk did not respond to CH3 input , Throttle ! ju…"

Luc Maximilien replied Aug 28, 2016 to After 19 minutes in Loiter ,150° Yaw rotation and went gently down vvithout responding to radio sticks

9 Aug 30, 2016
Reply by Luc Maximilien

"Hi, low power of the batteries not at all , they were at less than 2/3 of their capa…"

Luc Maximilien replied Aug 27, 2016 to After 19 minutes in Loiter ,150° Yaw rotation and went gently down vvithout responding to radio sticks

9 Aug 30, 2016
Reply by Luc Maximilien

"Before crash at minute 19, there is a variation as at minute 9 of MAG.MagX andxMAG2.…"

Luc Maximilien replied Aug 27, 2016 to After 19 minutes in Loiter ,150° Yaw rotation and went gently down vvithout responding to radio sticks

9 Aug 30, 2016
Reply by Luc Maximilien

"Finally thanks to Christian Mauch suggestions and  support I was able to solve the p…"

Luc Maximilien replied Aug 26, 2016 to Safety First: 100A & 200A Hall Sensor with BEC for Pixhawk / APM

116 Feb 27
Reply by Darshan Jain

"I wrote you an e-mail with attached photos and logs I trust you when you say that th…"

Luc Maximilien replied Aug 25, 2016 to Safety First: 100A & 200A Hall Sensor with BEC for Pixhawk / APM

116 Feb 27
Reply by Darshan Jain

"The 200A bought from Altigator in Belgium arrived without any calibration card, a wr…"

Luc Maximilien replied Aug 25, 2016 to Safety First: 100A & 200A Hall Sensor with BEC for Pixhawk / APM

116 Feb 27
Reply by Darshan Jain

"Today  had a VERY serious problem with compass after installing the 200A current sen…"

Luc Maximilien replied Aug 25, 2016 to Safety First: 100A & 200A Hall Sensor with BEC for Pixhawk / APM

116 Feb 27
Reply by Darshan Jain

"Low currents are hardly displayed so the current sensor might seems not to work but…"

Luc Maximilien replied Aug 16, 2016 to Pixhawk / Dual UBEC Distribution Board VI ISSUE

9 Sep 3, 2016
Reply by Luc Maximilien

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service