Rob J's Discussions (73)

Discussions Replied To (35) Replies Latest Activity

"You can use Mission Planner or Tower.  These will give you access to the parameters.…"

Rob J replied Dec 16, 2015 to Are there ways to turn off all the failsafes in 3DR drones?

1 Dec 16, 2015
Reply by Rob J

"I think I could load this into my Taranis...but, will this give me what I need to us…"

Rob J replied Nov 13, 2014 to Taranis 6 Position Switch for 6 Flight Modes w/APM 2.5 & Mission Planner

49 Nov 13, 2014
Reply by Greg

"Is the 4S a reference to a 4S battery?  If so, could this be modified for a 3S syste…"

Rob J replied Nov 13, 2014 to Taranis 6 Position Switch for 6 Flight Modes w/APM 2.5 & Mission Planner

49 Nov 13, 2014
Reply by Greg

"I hope you are wrong, but only time will tell I guess. "

Rob J replied Nov 7, 2014 to Open source and DIY Drones...what is this?

31 Nov 12, 2014
Reply by ausdroid

"Thanks to everyone who has responded...you have opened my eyes, given clarity where…"

Rob J replied Nov 7, 2014 to Open source and DIY Drones...what is this?

31 Nov 12, 2014
Reply by ausdroid

"Here is what was reported in terminal in MP...that is all I have...just not any firm…"

Rob J replied Nov 5, 2014 to Open source and DIY Drones...what is this?

31 Nov 12, 2014
Reply by ausdroid

"Nothing specifically happened to my firmware.  I have an Iris (not plus)(actually 2…"

Rob J replied Nov 5, 2014 to Open source and DIY Drones...what is this?

31 Nov 12, 2014
Reply by ausdroid

"Ok...that is about what I had suspected and hoped was the case, but it conflicts wit…"

Rob J replied Nov 5, 2014 to Open source and DIY Drones...what is this?

31 Nov 12, 2014
Reply by ausdroid

"Thank you all for the explanations.  Believe it or not, you have more confirmed what…"

Rob J replied Nov 5, 2014 to Open source and DIY Drones...what is this?

31 Nov 12, 2014
Reply by ausdroid

"You definitely don't need to send back the FlySky RC.  But you DO need to send back…"

Rob J replied Nov 4, 2014 to Replace IRIS+ radio module

8 Nov 4, 2014
Reply by Paul Meier

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service