Justin Stiltner's Discussions (32)

Discussions Replied To (23) Replies Latest Activity

"Hey sorry it looks like you havent gotten much response, I will try to help you out.…"

Justin Stiltner replied May 9, 2015 to CHDK Camera Control

1 May 9, 2015
Reply by Justin Stiltner

"You cannot send more than 8 channels out on a PPM port, this is due to the timing re…"

Justin Stiltner replied Dec 18, 2014 to Can I get 12 PWM channels out of FrSKY X8R receiver using the SBUS to PWM Decoder ?

12 Dec 18, 2014
Reply by Justin Stiltner

"Artem, It is simple to check if 3v3 pwm causes the issue, just use any spektrum rece…"

Justin Stiltner replied Dec 5, 2014 to Pixhawk causing motor sync issues.

371 Jan 15, 2017
Reply by Philip

"Also two IRIS+ quads, and a SIG Rascal 110" all running on pixhawk. "

Justin Stiltner replied Nov 20, 2014 to APM / Pixhawk systems with COA aproval

17 Nov 20, 2014
Reply by Justin Stiltner

"Just search df13 in the 3drobotics store and find the length and number of connectio…"

Justin Stiltner replied Oct 20, 2014 to Cable extensions for PX4 hardware

2 Oct 20, 2014
Reply by David Locascio

"For an APM 2.6 you can just crimp / solder a servo connector onto a mini usb cable f…"

Justin Stiltner replied Aug 27, 2014 to Geo tagging and CHDK Cable

2 Oct 10, 2014
Reply by bocorps

"Yep it looks like you could use the location KML button to get a file with the posit…"

Justin Stiltner replied Aug 14, 2014 to Using a Drone to Measure Light Over an Area

8 Nov 24, 2014
Reply by Marco Arena

"A few thoughts. Triggering based on distance or time is already implemented in the c…"

Justin Stiltner replied Aug 14, 2014 to Using a Drone to Measure Light Over an Area

8 Nov 24, 2014
Reply by Marco Arena

"I did the motor test and all of the motors are plugged into the correct number and a…"

Justin Stiltner replied Aug 10, 2014 to Pixhawk causing motor sync issues.

371 Jan 15, 2017
Reply by Philip

"All, I have just constructed a 3dr DIY Y6 following the instructions. I did all of t…"

Justin Stiltner replied Aug 10, 2014 to Pixhawk causing motor sync issues.

371 Jan 15, 2017
Reply by Philip

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service