Andrew Brown's Discussions (44)

Discussions Replied To (28) Replies Latest Activity

"Have you turned the loging on and see what is happening with your RC inputs? That m…"

Andrew Brown replied Sep 25, 2013 to Motor keeps turning

4 Sep 28, 2013
Reply by jim demeester

"Not an expert but think this is perfectly normal. I believe the elevator 3 twitch i…"

Andrew Brown replied Sep 22, 2013 to Elevator servo twitches 3 times then gimble starts working.

4 Oct 1, 2013
Reply by Jared Reabow

"Also ensure you have followed the tuning guide to set up you PID settings. Links:…"

Andrew Brown replied Sep 13, 2013 to APM 2.6 on CRI-CRI

7 Sep 13, 2013
Reply by Tomás Peyré

"No so much underpowered, but over loaded. No amount of power is going to make a stab…"

Andrew Brown replied Sep 12, 2013 to PID settings for HK FPV (arduplane)

29 Jan 25, 2014
Reply by Graham Dyer

"http://www.hobbyking.com/hobbyking/store/__17505__EPP_FPV_1_8M_X_Large_EPP_Carbon_Fi…"

Andrew Brown replied Sep 12, 2013 to PID settings for HK FPV (arduplane)

29 Jan 25, 2014
Reply by Graham Dyer

"If you read the tuning guides you will see the process will be to get the P dialed i…"

Andrew Brown replied Sep 12, 2013 to PID settings for HK FPV (arduplane)

29 Jan 25, 2014
Reply by Graham Dyer

"There are standard param files on the website for the skywalker. These were what i u…"

Andrew Brown replied Sep 10, 2013 to PID settings for HK FPV (arduplane)

29 Jan 25, 2014
Reply by Graham Dyer

"I tried to use this airframe, but it was terrible...  APM default settings are a go…"

Andrew Brown replied Sep 9, 2013 to PID settings for HK FPV (arduplane)

29 Jan 25, 2014
Reply by Graham Dyer

"Back from Holidays so back to arduplane. Thanks very much, I think I been playing w…"

Andrew Brown replied Sep 7, 2013 to Strange auto arming after reinstalling APM 2.4b arduplane

4 Sep 7, 2013
Reply by Andrew Brown

"Oops, my mistake i meant Version 2.74b!! I just reloaded arducopter, and the arming…"

Andrew Brown replied Aug 8, 2013 to Strange auto arming after reinstalling APM 2.4b arduplane

4 Sep 7, 2013
Reply by Andrew Brown

RSS

© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service