ultrojo's Discussions (87)

Discussions Replied To (78) Replies Latest Activity

Developer

"my parameter: WP_YAW_BEHAVIOR= 1 (heading nose to next WP & RTL) FS_THR_ENABLE=0…"

ultrojo replied Nov 15, 2014 to ArduCopter-3.2 beta testing

3751 Dec 7, 2015
Reply by Richard Kennedy

Developer

"AC3.2 ,APM2.6 ROI testing. GCS FAILSAFE = 2 (Continue Mission if failsafe GCS) See v…"

ultrojo replied Nov 14, 2014 to ArduCopter-3.2 beta testing

3751 Dec 7, 2015
Reply by Richard Kennedy

Developer

"sorry this is the 2 log. 1) bouncing landing (spline waypoint /ROI mission and RTL)…"

ultrojo replied Nov 3, 2014 to ArduCopter-3.2 beta testing

3751 Dec 7, 2015
Reply by Richard Kennedy

Developer

"@Randy screen shot my altitude. and during copter bumping to land, i try POSHOLD to…"

ultrojo replied Nov 3, 2014 to ArduCopter-3.2 beta testing

3751 Dec 7, 2015
Reply by Richard Kennedy

Developer

"still using 3.2rc12  testing spline waypoint & ROI on my QAV400 apm2.6, 4s power…"

ultrojo replied Nov 1, 2014 to ArduCopter-3.2 beta testing

3751 Dec 7, 2015
Reply by Richard Kennedy

Developer

"yup. love previous "poshold"   ... straight climbing faster and hold position. becau…"

ultrojo replied Oct 12, 2014 to ArduCopter-3.2 beta testing

3751 Dec 7, 2015
Reply by Richard Kennedy

Developer

"I like STAB throtle control, can climb & descending faster when take aerial phot…"

ultrojo replied Oct 11, 2014 to ArduCopter-3.2 beta testing

3751 Dec 7, 2015
Reply by Richard Kennedy

Developer

"can share minimosd firmware? small font"

ultrojo replied Oct 10, 2014 to ArduCopter-3.2 beta testing

3751 Dec 7, 2015
Reply by Richard Kennedy

Developer

"Thank you Randy for the feedback. Using ESC bec, I measure 4.9volt from output rail…"

ultrojo replied Oct 9, 2014 to ArduCopter-3.2 beta testing

3751 Dec 7, 2015
Reply by Richard Kennedy

Developer

"sory.. this is the log"

ultrojo replied Oct 9, 2014 to ArduCopter-3.2 beta testing

3751 Dec 7, 2015
Reply by Richard Kennedy

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service