2.0.47 Default PID's Question

It seems that with each revision the default PID's seem to change. My question is are those PID changes because we found a better match or the testing airframe (assuming default arducopter airframe) or are their actual code changes that require higher PID's.

 

The main reason i ask is currently i fly two tricopters. One on jacob's frame and the other the pro tricopter kit with long arms (19 inch). A revision or so ago the default stab roll/pitch P was 4.0 and rate roll/pitch was about 0.13. I had to decrease my stab roll/pitch P to 3.45 to stop oscillations.

 

Now, today i update and default stab P is like 4.7 and rate P has seemed to increase too. Has enough changed in the 2.0.47 branch that would require me to re-tune all over agian or would going back to PID's that work well on my frames be ok?

 

Thanks a ton

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Developer

    All the PIDs are tested to work on a stock jDrones frame. 

    I would keep your normal PIDs, what ever works for you, but with recent changes to the ADC, I've been able to increase the gains without a noticeable oscillation giving more control.

    You're frame could be entirely different however.

     

    I did do some tests with Loiter and it seems Loiter I is better off as 0, and Nav_P is better off higher.

    Checkout the blog post for that.

    Jason

This reply was deleted.

Activity

Hiroki Tanaka liked Hiroki Tanaka's profile
Oct 13
Derrick Davies liked lisa TDrones's profile
Sep 23
xemone liked Max Gilson's profile
Aug 31
More…