Hello,

Is it possible to use the new 3DR 915 telemetry set, with SiK 2.x firmware, to allow two ground stations? For instance MP on PC and DroidPlanner on Android.

Thoughts?

Brit

Views: 3550

Reply to This

Replies to This Discussion

Bruno,

Sorry you're having issues! That firmware is not mine, it comes directly from RFD. It worked for me, but it's been so long since I messed with it that I don't think I know any more than you do about how to recover or re-flash.

tried with 3rdradio config and RFDtools to reflash, but no luck. 

any tip on any "low level" flash tool for this modem?

thx man! worked perfectly

Hi Brit,

This version seems to work with my 3dr-Telemetry Modules V1.0 on 433MHz.

Only the android Software (Droidplaner, Droidplaner 2) seem to have problems if the PC is connected in parallel.

It switches quickly between connected and not connected but it can control the copter.

Do you happen to have a later (maybe further optimized) firmware version than v2.4?

Thanks in advance

Here is the link to the firmware source...

https://github.com/RFDesign/SiK/tree/SiK_Multipoint

Hi. How can I compile the multi point SiK for 3DR 433 MHz modules?

Thanks.

Jake Stew said:

Here is the link to the firmware source...

https://github.com/RFDesign/SiK/tree/SiK_Multipoint

Reply to Discussion

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service