3DR radio doesn´t load settings

Hello,
I have one problem:
I connect 3DR radio to PC, next 3DR rádio to APM, click "connect" in the mission planners and everything is fine, but when I go to "hardware -> 3DR radio and I want to load setting from 3DR radio, mission planner write: "Invalid ComPort"

I do not know what it means.

Please, does anyone have any ideas?

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Hello, My name is Keith,

         I read everything prior to this and followed exactly. I have another problem now. I have one solid green light on the ground unit and a flashing light on the air mod. Anyone have any suggestions?

    Martin Poller said:

    That's great you got fixed Adam, I did exactly the same as you, which is how I figured out not to press the connect button.

    Now you can get your radios working.

    3DR radio doesn´t load settings
    Hello, I have one problem: I connect 3DR radio to PC, next 3DR rádio to APM, click connect in the mission planners and everything is fine, but when…
  • Hi Adam,

    Before you click connect on the Hardware -> 3DR radio page check that you are using the port that is set up for the radio not the APM port, and check that you have the baud rate set to 57,600. Also you should not have the usb cable connected at the same time. Try this.

    Martin

This reply was deleted.

Activity