Discussions

3DR Radio setup remote failing

Posted by charliedeets on March 28, 2014 at 11:44pm

Hi there.

I am trying to connect my 3DR radios and when I click 'Load Settings' in APM Planner, I am getting a Failed status on the remote. The remote radio is blinking green, with a red pulse at the end of the green blink.

This is what I'm seeing in APM Planner.

3691108654?profile=original

Just wondering what could be wrong. Thanks! Charlie

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • charliedeets March 29, 2014 at 9:07pm

    I figured this out. I had to flash both the radios hooked up directly to APM Planner with the same Net ID. Out of curiosity, APM does not require any specific Net ID of the radio, does it?

  • charliedeets March 29, 2014 at 11:43am

    Just as an update. I plugged in the remote radio to APM Planner, and loaded the settings, transferred them to the 'remote' settings and then loaded the local radio back into 'local' and I still can't connect. Any tips why?

    Loading Remote Radio settings

    3701696129?profile=original

    Final setup:

    3701696144?profile=original

    • charliedeets > charliedeets March 29, 2014 at 1:58pm

      Here is what the blink looks like on the remote radio. It only does this when it's plugged into the board. If it's plugged directly into APM Planner it's normal.

This reply was deleted.

Activity