3DR Telemetry (433 MHz) and EzUHF or Dragonlink

Hi everyone,

Was considering getting an EzUHF or Dragonlink Tx/Rx kit for extra long range, but realized that their frequencies range may be interfering with the 3DR Telemetry kit. (I live in Europe so I have the 433 MHz version.)

Any idea how to overcome this or alternative for a long range RC system?

Or maybe this is not an issue?

I'm currently using a Turnigy 9X with FrSky DJT module and D8R-ii plus receiver (flashed with D8R-XP firmware)

Thanks everyone for your advices :)

Mathieu

P.S.: 900 MHz telemetry is not an option since

- It's forbidden

- it would get a lot of interferences from GSMs (900 MHz frequency here in France)

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Merci Matthieu.

  • Hello Tony,

    this is getting far more technical that I can handle ;)

    I bought the units from Marcin and they performed well. (Had to buy antennas and that was a pain to find reasonably sized ones).

    I will PM you Marcin’s email address so you can have the details you need.

    Cheers

    Mathieu 

    Tony said:

    Hello Mathieu,

    1- Do you confirm the presence of HM-TRP on both ways of the modules ?

    2- If it is the case, have you flashed a new firmware using usb to serial to ttl connection in order to change the frequency down to 868Mhz ?

    3- Do you use a sprectrum analyser to eventuelly observe the frequency shift ?

    3DR Telemetry (433 MHz) and EzUHF or Dragonlink
    Hi everyone, Was considering getting an EzUHF or Dragonlink Tx/Rx kit for extra long range, but realized that their frequencies range may be interfer…
  • Hello Tony,

    this is getting far more technical that I can handle ;)

    I bought the units from Marcin and they performed well. (Had to buy antennas and that was a pain to find reasonably sized ones).

    I will PM you Marcin’s email address so you can have the details you need.

    Cheers

    Mathieu 

    Tony said:

    Hello Mathieu,

    1- Do you confirm the presence of HM-TRP on both ways of the modules ?

    2- If it is the case, have you flashed a new firmware using usb to serial to ttl connection in order to change the frequency down to 868Mhz ?

    3- Do you use a sprectrum analyser to eventuelly observe the frequency shift ?

    3DR Telemetry (433 MHz) and EzUHF or Dragonlink
    Hi everyone, Was considering getting an EzUHF or Dragonlink Tx/Rx kit for extra long range, but realized that their frequencies range may be interfer…
  • or did you just buy it ?

  • Hello Mathieu,

    1- Do you confirm the presence of HM-TRP on both ways of the modules ?

    2- If it is the case, have you flashed a new firmware using usb to serial to ttl connection in order to change the frequency down to 868Mhz ?

    3- Do you use a sprectrum analyser to eventuelly observe the frequency shift ?

  • Hi Tony,

    for what it’s worth, I went with Marcin’s modules and it worked like a charm.

    ;)

    best,

    Mathieu

    Tony said:

    Hello Marcin,

    I/m french I Have the same problem, would you accept a pm from me ?

    THanks.

    3DR Telemetry (433 MHz) and EzUHF or Dragonlink
    Hi everyone, Was considering getting an EzUHF or Dragonlink Tx/Rx kit for extra long range, but realized that their frequencies range may be interfer…
  • Hi Tony,

    for what it’s worth, I went with Marcin’s modules and it worked like a charm.

    ;)

    best,

    Mathieu

    Tony said:

    Hello Marcin,

    I/m french I Have the same problem, would you accept a pm from me ?

    THanks.

    3DR Telemetry (433 MHz) and EzUHF or Dragonlink
    Hi everyone, Was considering getting an EzUHF or Dragonlink Tx/Rx kit for extra long range, but realized that their frequencies range may be interfer…
  • Hello Marcin,

    I/m french I Have the same problem, would you accept a pm from me ?

    THanks.

  • 868MHz version.

    • Thanks Marcin
      Just not sure if your talking about about the RC or the 3DR telemetry link?
This reply was deleted.

Activity

DIY Drones via Twitter
RT @chr1sa: My talk on PX4 and FAA certification is coming up at 1:45 PST today on the PX4 Dev Summit livestream. Includes some cool new st…
Tuesday
DIY Drones via Twitter
RT @seesharp: I'm tuned into the PX4 / Dronecode free live conference. Great stuff. Microsoft AirSim talk in 10 minutes. https://t.co/0zbZ2…
Monday
DIY Robocars via Twitter
RT @masato_ka: 距離センサを3つとESP32を付けたラジコンカーをDonkeyCarライクにNNで自動走行。3層FC極小モデルをTensorFlow Lite for microcontrollerで動かしてる。機体は借り物でRumiCarって言います。Tenso…
Monday
DIY Robocars via Twitter
RT @SmallpixelCar: My car was able to go all the way autonomously until the crosswalk. It was only 100 yards from the target. What should b…
Saturday
Liam left a comment on Agricultural UAVs
"Hi
I'm Liam from T-MOTOR. I would like to reach out to see if there is any possibility for us to work together.
We are a propulsion system manufacturer who offers motors, propellers and ESCs for all kinds of drone applications which vary from secur…"
Jun 30
DIY Robocars via Twitter
RT @SmallpixelCar: Smart move. The car used the shadow to guide it through the bridge. This was never in the training samples. But it learn…
Jun 30
DIY Robocars via Twitter
RT @SmallpixelCar: Getting closer to the target. Single camera. Untrained road. https://t.co/Wsr7RwDamj
Jun 29
Richard Cox left a comment on Australia
"Anyone in the DIYDRONES Australian subgroup based in Alice Springs, NT?
I am experimenting with Ardupilot (standard Arduplane), Pixhawk 4 FC in a 4-ch
RC "AXN Floater Jet" foamy plane..."
Jun 29
Omar Sykes left a comment on Australia
"Hi everyone, I am looking for someone who is good at drone building, repair and software in Adelaide. Please give me a call on 0477 319 219."
Jun 29
DIY Robocars via Twitter
RT @RoboticMasters: #donkeycar https://t.co/czuLoVRcA4
Jun 29
DIY Robocars via Twitter
https://t.co/DKQbNTbz0g
Jun 29
DIY Robocars via Twitter
RT @RoboticMasters: Donkey car, car car car car car car; Donkey car, car car car car car car; Donkey Car. Anyone like our tiny tiny donkey…
Jun 29
DIY Robocars via Twitter
RT @SmallpixelCar: After improving DBSCAN speed, I can get 11 frame per second on @NVIDIAEmbedded Jerson Xavier MAXN mode and the autonomou…
Jun 26
DIY Robocars via Twitter
RT @Heavy02011: Join us at next Virtual Race League: ⁦@diyrobocars⁩ Race #4 - Parking Lot Nerds, August 1st https://t.co/5KUpu7VGaH
Jun 25
DIY Robocars via Twitter
RT @SmallpixelCar: #CUDA implementation should be easy, because most of the time is on distance calculations berween two points and if the…
Jun 25
DIY Robocars via Twitter
RT @SmallpixelCar: This is the view from the car. Even my lanenet inference is fast on @NVIDIAEmbedded Jerson Xavier, DBSCAN clustering tak…
Jun 25
More…