Hi Guys, can someone please advise me as to what controller and microcontroller would be best suited for my setup, being, 4x 36v hub motors 350w? I'll be forever in your dept because I don't have a bloody clue. Lol. Mic.
You need to be a member of diydrones to add comments!
Concept drwg of frame.
Is this the next step. Is a micro controller required? Is the link a suitable unit?
5.8G FPV 200mW AV Wireless Transmitter TX 5.8GHz Rx RC Receiver TS351+RC805 Kit 2KM 2000M
I can always get better ones at a later stage. I just want to get the cart going so that I can go to the next stage and that is adapting the cutting deck to the cart. Thanks mate.
it should work for you !
Will this do the job OG?
Ok. I'll get that idea out of my head. I'm stinging. The budget is terrible.
sorry no it is not rated for enough amps to run your motor ! This type is not one ESC is a 4 in one! 4 not one ESC, all 4 on one PCB. You need one ESC per motor !!! so for 4 motors you need 4 ESC!!
mic d jona said:
The 2 links you sent me re- 6s 22v and 14s 51.87v being multi rotar ESC... Does that mean I can run the 4 motors off one controller?
OG, Wil I get away with this ESC if I run 24v?