Replies

  • In case anyone still cares about this topic :-)

    I was able to get a quad owner (Mikro - http://aeroquad.info/bin/view) to give me some data (http://www.rcgroups.com/forums/showpost.php?p=12890721&postcoun...). I have yet to complete the data analysis, but here are a few findings from what I've looked at so far:

    * The accelerometer data is very noisy. I'm not sure he's using proper anti-aliasing filters.
    * The X&Y accel data is certainly not constantly zero as the "theory" would have it. What I think is happening is this: as the quad is commanded to rotate, one motor increases its RPM, resulting in much more noise in the X&Y channels (but not as much in the Z axis for some reason).
    * Having said that, after analyzing the spectrum of the data via FFT tools, I am seeing a significant low frequency component that is present in both the gyro signal and the X&Y accel signals, which could mean that the accels are responding to the tilt (but it could mean other things, like both signals are responding to some other stimulus, or aliasing from the motor, or just that the "noise" from the faster-turning rotors is correlated with the tilt.
    * I do plan on running the data through a low-pass filter, to see if cleaning up the "noise" shows me anything.

    Also, I emailed my question to Dr. Robert Mahony (whom Bill Premerlani credits with the basic concept used in the DCM algorithm). Dr Mahony wrote back "This one twists my brain also. Firstly - the complementary filters work extremely well - so there must be an explanation." Interesting (and somewhat disheartening) to see that even the experts are scratching their heads! But he then goes on to say that, on average, the thrust vector has to match the gravity vector, as long as the vehicle is mostly hovering. So I think he's acknowledging that the accels are only reading the thrust vector.

    - Roy
This reply was deleted.

Activity

DIY Robocars via Twitter
21 hours ago
DIY Robocars via Twitter
RT @_JonMyer: 🏎 We need your help in naming my #AWS DeepRacer Underground Track 🏎 @davidfsmith's track is going to be referred to as 𝗔π—ͺ𝗦 𝗗…
Thursday
DIY Robocars via Twitter
RT @gclue_akira: δ»•δΊ‹γ‚‚γŠγ‚γ£γŸγ—γ€ι›»θ„³εŒ–γ«γ¨γ‚‰γ„γ€€#γƒžγƒͺγ‚ͺγ‚«γƒΌγƒˆγƒγƒƒγ‚― https://t.co/4IU90hCLgm
Thursday
DIY Robocars via Twitter
This is the hashtag to follow all the people in Japan who are hacking the new Nintendo Mario Kart with the real AR… https://twitter.com/i/web/status/1319281354664677376
Thursday
DIY Robocars via Twitter
RT @gclue_akira: @chr1sa @diyrobocars jupyter mario https://t.co/P0oHdjlCRq
Thursday
DIY Robocars via Twitter
RT @_JonMyer: 🚨Our 1st AWS DeepRacer Community Race is Underway on http://twitch.tv/aws 🚨 Join us to find out which member of your commu…
Tuesday
DIY Robocars via Twitter
Monday
DIY Robocars via Twitter
RT @BackyardRobotcs: After an admittedly long wait, the new Tinymovr R3.3 motor controller is now available https://tinymovr.com πŸ₯³
Monday
DIY Robocars via Twitter
RT @_JonMyer: 🏎 1 hr left before the #AWS #DeepRacer Community 🏎 Top 5 Race tomorrow LIVE on Twitch 1st Place = $50 Amazon GC or AWS Credit…
Monday
DIY Robocars via Twitter
Oct 16
DIY Robocars via Twitter
Oct 15
DIY Robocars via Twitter
Oct 14
DIY Robocars via Twitter
RT @davidfsmith: Race virtually with The AWS DeepRacer Community Race and then join us on the track to see how your times compare on the ph…
Oct 14
DIY Robocars via Twitter
Oct 14
Hiroki Tanaka liked Hiroki Tanaka's profile
Oct 13
DIY Robocars via Twitter
RT @breadcentric: It's now!
Oct 13
More…