I have started to add functions to MinimOsd code.

At first i did it for myself only. Added many functions i thought i need. Then opened this thread.

after a while, Pedro and later Miguel came, and things started to happen fast. :D

They have optimised the code and added even more things to it.

They have worked hard on CT, and it became a great tool!

Thank you Bough! :)

By now MinimOSD-Extra got a pretty advanced OSD.

Here it is in action:


- Changeable unit measurement (US, metric)

- Airspeed

- Home alt

- Battery Percent

- Battery used mah

- Current Draw

- Time From Startup (cleared at takeoff to show exact flight time)

- OSD Menu

- Variometer

- Wind horizontal speed and direction, and also the average wind speed of the last few minutes. 

- OSD on/off

- Switchable secound screen

- WP distance

- WP heading

- Crosstrack error

- Warning messages for Lost GPS fix, Stall, Overspeed, battery volt, battery Percent, RSSI

- Efficiency, glide distance & thermic notifier. 3 in one panel

- OSD Brightness

- HAM Call Sign

- After flight summary

- Trip distance

- Temperature

- Smoothened horizon

- Real heading


- Vertical speed

This functions can be turned on and off, and placed on different screens now, by the Config. tool.

Also RSSI, switching mode and channel and unit measurement, Stall speed warning, Overspeed warning, Battery warning volt, Battery percent warning, RSSI warning,  can be set in new Config Tool.

We built in a new way of setting video standards. Now OSD does not guessing anymore :). You can set it fixed from CT. It is in "Video Mode" menu.

Here is how it looks: (This video is a bit outdated, sorry. I will make a new one soon.)

The MinimOSD-Extra project is here: Link

This project is the developing version of the official Arducam OSD located here: Link

The latest stable version is: 2.2

The latest version can be downloaded from here: MinimOSD-Extra R800

Username: MinimOSD_Extra

Password: Top_Secret

CT is included. (The FW for Plane, Copter, Character upload and the character file is in the "FW & Char" directory inside CT directory)

We are sharing it to see videos you make using it! :)


Views: 293148

Reply to This

Replies to This Discussion

To use the rotation screen feature you need to use the Trainer Switch.

AlbeEagle, I'm lacking context here. Are you talking about switch OSD rotation or flight mode based rotation?

And I don't understand what you mean by "you have to use a trainer swtich". On my Taranis, I can assign any switch I want to any channel I want.

I think he is making reference to the Trainer Switch as it is a non latched switch and will return automatically when you let it go.  You really do not have to use this switch and as you say on the Taranis you can assign any channel to any switch or pot,  I think he is talking about simplicity of use here.  Unfortunatly for me I don't have any spare channel capacity on the receiver and I have to use the Mode Switch method :-(

Got it, he was telling me how to use the original code that burns an entire channel just for OSD rotation.

Indeed that's great if you have spare channels, I don't (I use 14 for that matter, and channels below 8 are premium, so I only have one spare with 7 channel motor glider with crow flaps). I can now use channel 8 for OSD rotation, turning my cameras on/off, and activating geofencing with ardupilot, all on the same channel with the same switch (obviously you couldn't do that with the old code).

I hope I'm not being That Guy, but is there an up-to-date readme that explains what is what in the repo and how to build minimosd extra?

Also, is there a way to make it show things, especially vertical speed, in SI units? (m/s)

Thank you. I've been a bit out of it for a few months. 

Maybe if you had looked at my tree :)


As for vertical speed, full scale pilots (I'm one) use xxx per minute, not per second. You can add that for yourself if you wish, but meters per second is not a standard unit for flying.

As a lot of people are not totally happy using Arduino maybe it would be a good idea to compile it into a hex file and add it here so others could download and use it?


I already did this, read my original post :)

All links and details here:



clearly says in its README:

Prebuilt binary for plane: Released/FW & Char/MinimOSD_Extra_Plane_R8??.hex

Hello Marc!

You can create version firmware for minimosd for copter?

Is this artifact on the screen a bug in the code? I initially thought it's just something on my minimosd but it can be observed on several videos/pictures on the internet displaying minimosd data. It either a dash or a dot but its always in the right lower quarter of the image. It's one of the virtual horizon characters.


Or is it a poor attempt of some kind of altitude gauge?

Also I sometimes get a duplicate of the pitch gauge. Marked with green arrow in the picture above.

The dot must be from the vertical speed indicator i think (you can delete it in the charset). According to the pitch, check on MinimOSD CT if you have overlapped layers, move them around to make sure you don't have two information gauges over each-other.

Is it possible to make MinimOSD show warnings which are visible for e.g. ground station (reason for arm fail, failsafe event etc)?

Reply to Discussion



Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service