Replies to This Discussion

3D RoboticsPermalink Reply by Chris Anderson on January 31, 2010 at 10:09pm

Here's a picture and a link.

• ▶ Reply

Permalink Reply by Joseph Propati on March 5, 2010 at 7:48am

These have been sold out for awhile, when are you going to make more??????

• ▶ Reply

AdminPermalink Reply by Thomas J Coyle III on March 5, 2010 at 11:40am

Joseph,

Mikro has recently completed the qualification of Shield v1.7, which is slightly different than the one in the picture which is the first Shield v1.6. I suggest that you try the Aeroquad website:

http://aeroquad.info/bin/view/Main/WebHome

Forum and check for the availability of the Shield v1.7 in Shield subforum.

Regards,
TCIII

• ▶ Reply

Permalink Reply by Joseph Propati on March 15, 2010 at 3:26pm

These boards are stillllllllllllllllllllllllllllllll sold out!

Does anyone know where someone can purchase one of these boards?
I really want to get started on my project and the lack of getting this board is just so frustrating.

Thanks for any help...

Joe

• ▶ Reply

AdminPermalink Reply by Thomas J Coyle III on March 15, 2010 at 5:50pm

Joseph,

Sorry to hear that the latest version 1.7 is sold out. I have three of the Shield v 1.6.1 and they work quite well. Since the Shield is a unique design, I do not know of anyother source other than the Aeroquad Store. The only thing that I can suggest is that you check the Aeroquad store daily and when they are back in stock, buy immediately. I suspect that Mikro will have more in stock within the next two weeks.

Regards,
TCIII

• ▶ Reply

Permalink Reply by Joseph Propati on March 15, 2010 at 10:38pm

I will start checking every day and when I see them I think I will buy 3 also... Just so I have them for future use.
Thanks
If anyone have one for sale let me know.
Joe

• ▶ Reply

Permalink Reply by Joseph Propati on March 16, 2010 at 4:05pm

Ok!
The 1.7 Aeroquad shields are no available on the Aeroquad website!!!
Yes!
I was able to purchase two so don't worry about selling me one, I finally got one!
Thanks for everyones help!
Joe

• ▶ Reply

▶ Reply to Discussion