Alt_hold with baro problem stabilizing

Hello, I'm having some trouble with my baro. I'm running 2.0.50 taken from git.

 

When I'm in alt_hold at sonar altitude, it holds very well. But when I'm in baro altitude (more than 7m) the alt hold sucks. I can hear motors change speed very fast. 

Here is an example log of this:

 

3690899447?profile=originalFisrt alt_hold (in green it's the mode) is very unstable (I'm at 12 m) when I go down to sonar altitude the alt_hold is almost perfect.

If I look at baro readings I see a lot of noise. Here is the same log but with the baro alt and the throtle output (taken from the ctun data)

3690899601?profile=original

It's possible to see that Arducopter has a lot of problems to hold altitude. 

I used to have some sonar problem but now is working right.

I attached the log file.

 

What could be the problem?

2011-11-19 01-39 7.log

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Just another info, I just test in cli mode and I got this as values:

    3692303786?profile=originalThanks for any help.

     

This reply was deleted.

Activity