This is my holiday project.
Im trying to keep costs down, so have stayed with Hobbyking parts as much as possible.
Im not an Electrical Engineer, so I'm working on what I've researched just in the past few hours.
Here's my schematic. I don't mind if you make any comments, to help me refine this design.
Once I have the schematic worked out correctly, I will produce a proper schematic for all to use.
Here is my parts list
2200mAh 1S LiPo
USB Battery Charger
Bluetooth Module
Relay
LEDs
Enclosure
Im hoping I can replace the onboard SMD LEDs with the pin LEDs.
All up, the parts will be about $30 +shipping, but I'll try and get them locally if it fits the budget.
You need to be a member of diydrones to add comments!
Replies
Surprise, surprise.... I've revised the material list, I've blown my budget already.
Just bought the Relay, Bluetooth and hobbyking stuff, will grab the others from my local store when I need it.
1600mAh 2S battery
2S/3S balance charger
Switch and UBEC
Bluetooth module
SPDT Relay
Red LED
Blue LED
Green LED
Yellow LED
Enclosure
All up, including shipping, Im in for $68.52. The added cost is due to the upgraded battery, and inclusion of the switch/UBEC, and the increased cost of the bluetooth module for faster delivery. I think these items will make it a more robust system.
Should be done in a week or so, so i'll post some pics then.