APM Auto Mode Failure - Please Help

I was out today flying in Manual, Stabilize, RTL and Auto mode today and evertything started out OK.  The Auto mission had 7 way points and a home location.  The altitude of each way point is 100 meters.  I started out in manual and when I reached about 40 meters in height, I switched from manual to auto mode.  The mission was proceeding according to planning until arriving at way point 6, then the plane throttled down and was headed for a crash.  I flipped to manual and between that and RTL mode I was able to recover without a crash.   My command setting for Way Point 7 is RTL instead of just "WAY POINT".  Although I may be mistaken, I thought that would return the plane in auto mode and that it would loiter or circle forever around the home location on that setting.  Any help that anyone could provide would be greatly appreciated.  I am including the tlog from the flight.

I have not updated the firmware on APM in a few months.  Not sure the specific version number for my Arduplane software

Flying:    Sky Surfer

Param File:  Bixler

3DR Radio 915Mhz

APM:   2.5 with external uBlox GPS, but internal compass.

2013-08-24%20LongestGoodFlight.tlog

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Developer

    Waypoint 6 and 7 where on top of each other. Waypoint 7 was not RTL. All I have been able to deduce so far, as soon as you hit waypoint 7, the motors cut and the plane stalled. It was the end of the mission.

    I extracted the WP using mission planner, so I am assuming it's working correctly.

  • Hi,

    What's your ALT_HOLD_RTL parameter value?

  • Strange!

    Was the 6th regular WP also?

    I uploaded here of the your tracking log: http://www.droneshare.com/view/bmeabx7

    Just to analyse it.

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @SahikaGenc: AWS DeepRacer & Hot Wheels Track https://youtu.be/4H0Ei07RdR4 via @YouTube
Monday
DIY Robocars via Twitter
Sep 8
DIY Robocars via Twitter
RT @davsca1: We are releasing the code of our Fisher Information Field, the first dedicated map for perception-aware planning that is >10x…
Sep 8
DIY Robocars via Twitter
RT @SmallpixelCar: How this works: 1)object detection to find cones in single camera image, 30 frames/sec on @NVIDIAEmbedded Xavier. 2)comp…
Sep 8
DIY Robocars via Twitter
RT @SmallpixelCar: Use two color cones to guide the robocar. No map needed, on onsite training needed. Just place the cones and it will fol…
Sep 7
DIY Robocars via Twitter
Sep 7
DIY Robocars via Twitter
RT @roboton_io: Great to see http://roboton.io running at 60fps on the cheapest #chromebook we could find! #edtech #robotics #educat…
Sep 3
DIY Robocars via Twitter
RT @openmvcam: Crazy in-depth article about using the OpenMV Cam for Astrophotography: https://github.com/frank26080115/OpemMV-Astrophotography-Gear https://t.co/BPoK9QDEwS
Sep 3
DIY Robocars via Twitter
RT @openmvcam: Hi folks, it's finally here! Our first draft of our Arduino Interface Library is out! It works over SoftwareSerial, Hardware…
Sep 3
DIY Robocars via Twitter
RT @chr1sa: Please let them have an open API. This would be perfect for @DIYRobocars races https://twitter.com/NintendoAmerica/status/1301513099707658246
Sep 3
DIY Robocars via Twitter
RT @SmallpixelCar: Lanenet pretty much used all my GPU power on @NVIDIAEmbedded Xavier since I optimized with tensorRT. I need to run anoth…
Sep 3
xemone liked Max Gilson's profile
Aug 31
DIY Robocars via Twitter
RT @LyftLevel5: Our @kaggle competition on Motion Prediction for Autonomous Vehicles is now live! Experiment with the largest-ever self-dri…
Aug 24
DIY Robocars via Twitter
RT @chr1sa: Our next @DIYRobocars virtual AI car race will be on Sept 26th. Sign up here https://www.meetup.com/DIYRobocars/events/272786977/ https://t.co/UENKGSOWO8
Aug 24
DIY Robocars via Twitter
New ready-to-run @NVIDIAEmbedded JetRacer car from Waveshare. Perfect for the next @diyrobocars race as soon as we… https://twitter.com/i/web/status/1297960223013867520
Aug 24
DIY Drones via Twitter
RT @chr1sa: The US government just approved 5 US-made drones for purchase, all based on the @Dronecode @PX4Autopilot standard. Great news f…
Aug 20
More…