APM Copter 2.6 Land after a few seconds

Hey guys-

First post : )

I have had my new 3DR Quad-D with APM Mega 2.6 for about 10 days and have had an issue almost every time where the APM goes into "land" within about 15 seconds of liftoff.  It is January here and I keep the LiPos in the cold cold garage.  Perhaps they need a warmup?  In flight, a quick switch from Stabilize to Loiter and back to STAB seems to clear the issue for the remainder of the flight.

Here's my relevant configuration-
Frame: 3D Robotics Quad-D
Config: X

FCU: Ardupilot Mega 2.6 w/ GPS and Compass
Power Module: 3DR APM PM
Batt: 3S 5000 mAh.  **5 years old.  Balanced weekly.  Lasts about 3700mAh
ESC: (4) 3DR 20A
Motor: (4) AC2836-358 880kV
Prop: (4) APC 11x4.7SF(P)
RC: FlySky FS-TH9x, FlySky D4R-II RX

Telemetry used for Minim OSD and AndroCopter via 915MHz radio modem

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Hi Micah

    Sounds like battery failsafe is kicking in, but the only way to tell for sure is if you clear your flight logs, do a fligt, then post the dataflash log so we can see exactly what is going on.

    Wessie

This reply was deleted.

Activity