So thi may sound like a silly question... but i ordered an adru board + sheild kit+ IMU and I got it all soldered up! but im noticing in the manual there are some cables running from the IMU to the sheild.
My question is where did those conectors come from... They arnt soldered to the board because then you couldnt program it?
Replies
Maybe post a picture of your boards and we could help better by comparing what you have done with what others have done. The most common setup is Oil-pan (IMU on bottom) mode, I believe, or is it Shield (IMU on top) mode.
The yellow, green, red, and black wires with black ends? Those are just prototyping jumper wires. They pull right off and then you slip on the programming connector. Don't fly like that!