100KM

Ardurover on Turnigy trailblazer

I found the Turnigy trailblazer from hobbyking a fairly cheap, but still performant and fast base vehicle to start testing my APM1280 + imu and ardurover 2.20 firmware on it.

 

After some days of hairpulling, because a magnet from my camera lens was dangling too close to the magnetometer, I got it running pretty good.

With some finetuning and maybe some modifications I should be able to give the turnigy trailblazer some more speed.  And ofcourse record fpv video :-)

 

I hope we can pick up the development of ardurover, cause this is really a fun project !  

Ideas for improvements are welcome !

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • 100KM

    My trailblazer is still running strong!  I did put a $5 cooler on the motor and some diff oil in the differentails.  Also reglued the tires with CA (just put some CA along the rim.

    It's a very fun car with awesome performance for fundriving.  I wouldn't recommend it for racing as it is not agile enough, but for a  apm rover you get a lot of bang for buck.  Spare parts are also very cheap at hobbyking, but are also available from redcat (it's the same car as the redcat earthquake 8E)

    Only 1 thing will make me advise against it : it seems it has dissapeared from the hobbyking international site and is only available in Germany, USA and AUS now.  So I'm a bit afraid that hobbyking may stop selling it, which could leave you searching for spare parts (not that you need any, so far I have only replaced 1 screw that fell out and got lost)

    Oh, and it's damn fun to give the $500 traxxas owners a run for their money.

  • Developer

    Hi u4eake,

    can you still recomment the trailblazer ?

    i need another vehicle soon and it seems that it could fit.

    Regards,

    Linus

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @SahikaGenc: AWS DeepRacer & Hot Wheels Track https://youtu.be/4H0Ei07RdR4 via @YouTube
Monday
DIY Robocars via Twitter
Sep 8
DIY Robocars via Twitter
RT @davsca1: We are releasing the code of our Fisher Information Field, the first dedicated map for perception-aware planning that is >10x…
Sep 8
DIY Robocars via Twitter
RT @SmallpixelCar: How this works: 1)object detection to find cones in single camera image, 30 frames/sec on @NVIDIAEmbedded Xavier. 2)comp…
Sep 8
DIY Robocars via Twitter
RT @SmallpixelCar: Use two color cones to guide the robocar. No map needed, on onsite training needed. Just place the cones and it will fol…
Sep 7
DIY Robocars via Twitter
Sep 7
DIY Robocars via Twitter
RT @roboton_io: Great to see http://roboton.io running at 60fps on the cheapest #chromebook we could find! #edtech #robotics #educat…
Sep 3
DIY Robocars via Twitter
RT @openmvcam: Crazy in-depth article about using the OpenMV Cam for Astrophotography: https://github.com/frank26080115/OpemMV-Astrophotography-Gear https://t.co/BPoK9QDEwS
Sep 3
DIY Robocars via Twitter
RT @openmvcam: Hi folks, it's finally here! Our first draft of our Arduino Interface Library is out! It works over SoftwareSerial, Hardware…
Sep 3
DIY Robocars via Twitter
RT @chr1sa: Please let them have an open API. This would be perfect for @DIYRobocars races https://twitter.com/NintendoAmerica/status/1301513099707658246
Sep 3
DIY Robocars via Twitter
RT @SmallpixelCar: Lanenet pretty much used all my GPU power on @NVIDIAEmbedded Xavier since I optimized with tensorRT. I need to run anoth…
Sep 3
xemone liked Max Gilson's profile
Aug 31
DIY Robocars via Twitter
RT @LyftLevel5: Our @kaggle competition on Motion Prediction for Autonomous Vehicles is now live! Experiment with the largest-ever self-dri…
Aug 24
DIY Robocars via Twitter
RT @chr1sa: Our next @DIYRobocars virtual AI car race will be on Sept 26th. Sign up here https://www.meetup.com/DIYRobocars/events/272786977/ https://t.co/UENKGSOWO8
Aug 24
DIY Robocars via Twitter
New ready-to-run @NVIDIAEmbedded JetRacer car from Waveshare. Perfect for the next @diyrobocars race as soon as we… https://twitter.com/i/web/status/1297960223013867520
Aug 24
DIY Drones via Twitter
RT @chr1sa: The US government just approved 5 US-made drones for purchase, all based on the @Dronecode @PX4Autopilot standard. Great news f…
Aug 20
More…