I haven't seen anyone with a similar situation so far, but I have an SK-450 with an APM 2.5, and I'm having problems switching from "takeoff" to the rest of a mission and from the last waypoint to "land". More specifically, it will takeoff and loiter at the takeoff waypoint, but will not transition to the next waypoint. The same happens with landing, where it will fly to the last waypoint and (loosely) loiter over the landing point, but will not land. In addition to this, jump refuses to work. Triggering takeoff and landing separately by setting the mode on my tablet works perfectly fine, it just seems that the mission progression won't switch. 

I have had this problem on 3.0.1 and 3.1.2. I reflashed my eeprom, updated to 3.1.2, and reloaded my config, and I still have the same problem. I've attached logs of multiple auto missions, sorry for the length of the logs, I was on my tablet. Also, there are some points at which I'm using follow me, which is great for getting exercise :) I also have my config and testing mission attached. Any help is appreciated, thanks in advance!

Views: 229

Attachments:

Reply to This

Replies to This Discussion

Can anyone provide any feedback as to this situation? Thanks!

Honestly though, anyone have any ideas? I've been flying for a while now, and I still haven't been able to figure it out. It's really helpful to have auto working when I demonstrate for the Air Force again, and I have a demo coming up in a few days :)

*Bump*

Having the same issue with landing when transitioning from Stabilize or Circle, comes down to 10m and just hovers. Throttle is on minimum. Triggering land from Mission Planner initiates successful landing. Latest firmware.

Reply to Discussion

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service