Replies

  • You can use a precise (+-2cm) Indoor "GPS": http://marvelmind.com/.

    Here the a couple of demos:

    94087

  • Not sure what your need is as far a flying the IRIS indoors but I wanted to share this in case you havn't seen it already.  

    Amazing project!

    http://http://diydrones.com/profiles/blogs/project-tango-3d-mapping...

    And here is Chris Anderson and Brandon Hurd speaking a bit about it at ARM TechCon http://youtu.be/EwYTgzfQ-A8?t=20m40s

    • Thanks for the reply. The first link , on the bottom.. That guy is from my department in Naples, Italy :) I knew that project. Thanks anyway.

      The second video is cool :) 

  • You'll need to change the Arming Check (ARMING_CHECK) param within Mission Planner to ignore GPS lock before arming the motors for flight.

    http://copter.ardupilot.com/wiki/prearm_safety_check/

  • Yes, no problem, you can't use modes that require GPS.
    • That is what I did to be able to use the IRIS indoor:

      DisableGPS_zps4e870504.png

      • I tried using these settings for an indoor flight, but was unsuccessful at arming the motors still.  I had to completely disable the "Arming Check" instead of only "SkipGPS".  Any ideas why that might be?

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @TinkerGen_: "The Tinkergen MARK ($199) is my new favorite starter robocar. It’s got everything — computer vision, deep learning, sensor…
Nov 23
DIY Robocars via Twitter
Nov 23
DIY Robocars via Twitter
RT @roboton_io: Join our FREE Sumo Competition 🤖🏆 👉 https://roboton.io/ranking/vsc2020 #sumo #robot #edtech #competition #games4ed https://t.co/WOx…
Nov 16
DIY Drones via Twitter
First impressions of Tinkergen MARK robocar https://ift.tt/36IeZHc
Nov 16
DIY Robocars via Twitter
Our review of the @TinkerGen_ MARK robocar, which is the best on the market right now https://diyrobocars.com/2020/11/15/first-impressions-of-tinkergen-mark-robocar/ https://t.co/ENIlU5SfZ2
Nov 15
DIY Robocars via Twitter
RT @Ingmar_Stapel: I have now explained the OpenBot project in great detail on my blog with 12 articles step by step. I hope you enjoy read…
Nov 15
DIY Robocars via Twitter
RT @DAVGtech: This is a must attend. Click the link, follow link to read the story, sign up. #chaos2020 #digitalconnection #digitalworld ht…
Nov 15
DIY Robocars via Twitter
RT @a1k0n: Got a new chassis for outdoor races (hobbyking Quantum Vandal) but I totally didn't expect that it might cause problems for my g…
Nov 11
DIY Drones via Twitter
First impressions of the Intel OpenBot https://ift.tt/36qkVV4
Nov 10
DIY Robocars via Twitter
Nov 9
DIY Robocars via Twitter
Excellent use of cardboard instead of 3D printing! https://twitter.com/Ingmar_Stapel/status/1324960595318333441
Nov 7
DIY Robocars via Twitter
RT @chr1sa: We've got a record 50 teams competing in this month's @DIYRobocars @donkey_car virtual AI car race. Starting today at 10:00am…
Nov 7
DIY Robocars via Twitter
Nov 6
DIY Robocars via Twitter
RT @a1k0n: Car's view, using a fisheye camera. The ceiling light tracking algorithm gave me some ideas to improve ConeSLAM, and having grou…
Nov 5
DIY Robocars via Twitter
RT @a1k0n: To get ground truth I measured the rug, found the pixel coordinates of its corners, calibrated my phone camera with my standard…
Nov 5
DIY Robocars via Twitter
RT @a1k0n: @DIYRobocars is back in December, but outside. Time to reinvestigate ConeSLAM! I rigged up a quick and dirty ground-truth captur…
Nov 5
More…