Hi!
First of all, I want to apologize for the lack of knowledge at this topic. And the spelling errors (Im from Denmark).
I have built relatively small quad before, but figured I wanted to go bigger and better! - My choice fell on a hex, which isn't made for fast travel or agility. But for the medium heavy lift and stability. In the future I want to experiment with autonomous flight, but not atm.
During my search for motor I found these quite interesting:
Turnigy Multistar 4822-690Kv 22Pole Multi-Rotor Outrunner
Multistar Elite 3508-268KV High Voltage Endurance Motor
Nothing is final, but im planning to use a 6S battery to drive the whole thing. As flightcontroller I thought about the CC3D.
What is your opinions about the motors? Do you have any better alternatives?
ANY suggestions on any of the parts are warmly welcome! :)
Thank you!
Replies
Hi James.
Thank you for advice! :)
I have got a couple of questions...
I've been looking for escs, but 6s 20 amp esc with Simon K firmware aren't around for a decent price. Is 6s overkill?
And what do you as a experienced prefer when it comes to esc? Simon K or? And can I use the "cheap" ebay ones?
Secondly, flightcontroller.
Am I making a bad call by choosing cc3d? :) Will a pixhawk or naze do me better?
Thanky :)