I am new to the hobby, and I have been trying to setup the radio calibration using the Mission Planner the past week with no luck. This is what I have at my disposal:

  • DX5 and a DX8 transmitters.
  • DSM-X and DSM-2 remote receivers.

I have connected the DSM remote receivers to the dedicated port on the Pixhawk. The issue is that when I initiate the binding process, a window prompts telling me to put the transmitter in bind mode, which I do but nothing happens.

Views: 464


Reply to This

Replies to This Discussion

https://pixhawk.org/peripherals/radio-control/spektrum_dsm scroll down to the bottom where it says d5-dx8 radios.. ..

see i want to use a satallite too and im going to try this when i get my pixhawk.. so follow that procedure and let me know what happens..

Hello James,

Thanks for posting this. It seems to bind fine using the QGroundControl software. However, I still can't get it to work using the Mission Planner, and I don't know why. 

Reply to Discussion



Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service