Aside from Thanksgiving, I had a fun weekend.

I've been using a Feiyu-Tech gimbal on my Solo (because I wanted to see if I could get it to work), and wanted to be able to control the camera from my Solo's transmitter. The camera is a Xiaomi Yi, which I like. It's a great little camera that does a ton of cool things for an impressive price. 

It turns out it wasn't hard to do at all. All I needed to do was get the camera onto the Solo's wifi network with a static IP address, and then detect when the camera button on the Solo's transmitter was clicked so I could send a command to the camera to start or stop video (or take a still picture).

Some Xiaomi-hacking geniuses have already figured how to set up the camera and what commands to send to it, and I built on that to control the camera. 

It's not the "Solo with 3DR gimbal and GoPro" setup that most people are using, which is kind of the point. "Solo with Feiyu-Tech gimbal and Xiaomi Yi" is harder to pronounce, and harder to implement. But it works pretty well, and putting it together has been fun.

Here's some details about the camera setup, for whoever's interested: 

https://github.com/kellyschrock/3drsolo_xiaomi

Views: 10760

Replies to This Discussion

Probably not great. I flew with a friend at the same time of day, same conditions, everything. By the time we finished up, it was late dusk. Afterward, we went off and did our post-production. His video looked professional, mine looked decidedly less so. At the time, I didn't have a gimbal, and I've never bothered to adjust anything for low light. I'm not sure what he did to his, but his colors were richer, and things were less grainy. 

huh, do you have the two videos?

This is great thanks!

Anyone getting Xiaomi Yi working with Tower/Solo survey? Other than setting to 1 second intervals it would be great to have it triggered.

Yi with a vibration dampened rigid mount would decrease payload/increase flight time and AUC (All Up Cost).

Hi Kelly

do you have any experience to control camera triggering on other brands such as sony ?

i am going to install sony camera on SOLO but main problem is triggering .

Since the wireless connection between the Solo and controller is wi-fi, you're able to put other devices on the same network and control them something else on the network. In my case, I modified ShotManager to send commands to the camera (with a specific IP address) whenever I pressed the record "paddle" on the controller. But you don't have to do that. Since you're on an IP network, you could build a simple web app (or an Android or iOS app) to run on the tablet and send commands to some device on the network. That device, in turn, might be running a small web service that takes your commands and sends something to the camera to trigger it. So the first thing I would want to know is, what does the Sony camera provide in the way of remote triggering? Bluetooth? Wifi? Something else?

i read this topic but i dont understand ho can i do it .

Will the QX1 be a good addition

Ive read the articles about the Feiyu gimbal and how to wire it up, where people are soldering the connections directly to the Solo IO board. I was wondering why a pigtail/adapter couldnt be made that allows the Feiyu to just plug in to the Solo gimbal connector? They show soldering onto pin 14 of the main board. Which is ioChan6, tilt control. Do you know what pin on the gimbal connector this would be? (Gimbal RX)?

https://dev.3dr.com/hardware-gimbalbay.html

Great tips, I will use them for my photos! More tips are also here http://fixthephoto.com/blog/tech-tips/best-camera-for-amateur-photo...

RSS

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service