CRIUS + Micro servo

How to make a servo actuate autonomously when reached at certain target (coordinate) using CRIUS AIOP and mirco servo.

Can anybody help me related to that problem. Is there need a programming??

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –


  • Do you know how to program a flight plan in mission planner yet?
    After the waypoint, use Add Below to insert another, change to Do_Set_Servo. Enter the channel number and the PWM setting you want. Just use 1000 for one direction or 2000 for the other. No coding required, very simple.
  • Put Do_Set_Servo after the waypoint. Fill in which servo number and what PWM you want, like 1000 for close or 2000 for open.
    In the parameters the RC# Function should be set to zero.
This reply was deleted.


Liam left a comment on Agricultural UAVs
I'm Liam from T-MOTOR. I would like to reach out to see if there is any possibility for us to work together.
We are a propulsion system manufacturer who offers motors, propellers and ESCs for all kinds of drone applications which vary from secur…"
Jun 30
Richard Cox left a comment on Australia
"Anyone in the DIYDRONES Australian subgroup based in Alice Springs, NT?
I am experimenting with Ardupilot (standard Arduplane), Pixhawk 4 FC in a 4-ch
RC "AXN Floater Jet" foamy plane..."
Jun 29
Omar Sykes left a comment on Australia
"Hi everyone, I am looking for someone who is good at drone building, repair and software in Adelaide. Please give me a call on 0477 319 219."
Jun 29