Did my ArduPilot Mega quit working?

I had everything working and in the tuning phase but something has gone wrong. Even if I put it in STABILIZE while on the ground and move the plane around, roll and pitch are indicated with the attitude indicator but no servos move. I also went into the tuning mode, it shows the pitch and roll servos responding but nothing happens at the servos.  I should also be able to move the sticks while in STABILIZE and have the servos respond to inputs - nothing happens.

FBW_B I should be seeing elevator move down and respond to airspeed but nothing happens - also no servo movement when sticks are moved.

Batteries are good - everything works in manual. I had all defaut PID's saved, reinstalled still nothing. Erased EEPROM reinstalled all sensors work - no output from servos in previously stated modes.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Hi, 

    I got the some problems like that.

     

    how can I clear the eeprom?

     

    regards,

    Alvaro

  • Distributor

    Hi Clark,

     

    Have you tried to reset the board to factory and re-flash the code?

     

    Regards

     

    Martin.

This reply was deleted.

Activity