Hi Guys,

I need help with selection of parts for my Robocat 270 drone. I have a Turnigy Pro radio and frsky X8R receiver and transmitter. Need a flight controller that has GPS, Flight Hold, Return Home and Camera Gimbal capable.

Something that I can use my phone to control and FPV would be awesome to have.

I have the following items below

Turnigy 9XR Pro

Frsky X8R R/T

Turnigy 30A esc 

Robocat 270mm frame


Flight Controller

Power distribution board

Reliable motors for a 30 amp esc


Views: 585

Reply to This

Replies to This Discussion

Awesome, thank you for the info. What about the naza m v2 ?

That is very old as well 8 bit technology ! if your doing photo work it is ok it works but OLD!

Is the pix falcon easy to program?

you may want to look at DJI N3 or A4 this are the newer FC from DJI !

Pix hawk is not easy if your not going to read and follow the instructions to the letter ! this FC is well documented and open source! 

Awesome. Ty

Reply to Discussion


© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service