I need help with selection of parts for my Robocat 270 drone. I have a Turnigy Pro radio and frsky X8R receiver and transmitter. Need a flight controller that has GPS, Flight Hold, Return Home and Camera Gimbal capable.
Something that I can use my phone to control and FPV would be awesome to have.
I have the following items below
Turnigy 9XR Pro
Frsky X8R R/T
Turnigy 30A esc
Robocat 270mm frame
Power distribution board
Reliable motors for a 30 amp esc
motors are very subjective you need to know waight of the craft and KV of the motor and prop size other wise we can not help you! I suggest you ditch turnigy ESC garbage for a 32bit 4 in 1 Bheli firm wear NEW 32bit ESC . A good pairing with a 32Bit flight controller like pix hawk.
Power distribution board & Current Sensor:
32 bit FC:
That is very old as well 8 bit technology ! if your doing photo work it is ok it works but OLD!
you may want to look at DJI N3 or A4 this are the newer FC from DJI !
Pix hawk is not easy if your not going to read and follow the instructions to the letter ! this FC is well documented and open source!