Hello all,

getting into this finally. I was wanting to order a electronics platform for my easy star, but it was sold out. Can I also order the one for bixler? If not I will adapt the plan on thingiverse: http://www.thingiverse.com/thing:11661  (now "just" a FPV platform).

Views: 319

Reply to This

Replies to This Discussion

Is the platform for the bixler the one here:  https://store.diydrones.com/Bixler_SkySurfer_Chassis_No_Pan_Tilt_p/...?  If so, then it will fit, as long as you don't attach the bottom deck.  The NiCd battery pack and electronics of the EasyStar gets in the way.

Also, I would fly with the Bixler.  In my opinion, having the ailerons makes flying so much easier.  I have flown with both the EasyStar and the Bixler, and have found that I was able to control the plane much better when there were ailerons.

Hi Brandon,

thanks! That is indeed the one I meant. I realise that the bixler is a superior starter plane, but I was unable to find a seller in Europe, and getting it from hobbyking in the US meant another $40 shipment cost. So I went with the budget Easystar as a learning plane. Might add those ailerons, apparently you can cut those out in the plane.

No problem.

Reply to Discussion

RSS

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service