Hello,

I have built my first drone (f450, pixhawk fc, Racestar Metal 4 in 1 esc), but I have an issue with the ESC. When the FC sends a signal to rotate motor A or C, it works fine. When a signal is sent to motor B, nothing happens. And when a signal is sent to motor D, both motor B and C starts to spin. The solderings are good, the FC sends a good signal. What is the issue for this? Is the ESC faulty?

Views: 69

Reply to This

Replies to This Discussion

Perhaps the servo functions needs to be set to the correct motors... See if this helps:

http://ardupilot.org/copter/docs/common-rcoutput-mapping.html

Thanks!

The settings in the FC is good. Sadly, it is an ESC issue.

Bill Salopek said:

Perhaps the servo functions needs to be set to the correct motors... See if this helps:

http://ardupilot.org/copter/docs/common-rcoutput-mapping.html

Reply to Discussion

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service