frsky - Discussions - diydrones2024-03-19T12:42:04Zhttps://diydrones.com/forum/topics/feed/tag/frskyFrSky DJT-JR 2.4GHz Transmitter Telemetry Modulehttps://diydrones.com/forum/topics/frsky-djt-jr-2-4ghz-transmitter-telemetry-module2020-08-09T13:55:05.000Z2020-08-09T13:55:05.000ZChasityWhitehttps://diydrones.com/members/ChasityWhite<div><p>The DJT telemetry transmitter module is a great choice if your transmiter is compatable with the JR modules. (as well as Turnigy 9x/FlySky 9x/EMAX 9x)</p><p>The Telemetry Radio System developed by<a href="https://www.horusrc.com/"><strong><em> FrSky </em></strong></a>provides an additional return link that is used for monitoring the Rx’s voltage, poor receiver reception, temperature, location, speed and so on.</p><p>The module is compatible with both the V8-series (non-telemetry) and the D-Series (telemetry) receivers.</p><p> </p><p><strong>Features:</strong></p><p>Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility.</p><p>Easy to bind and very fast link-up.</p><p>Excellent reboot time.</p><p>True Diversity with two antennas.</p><p>All channels can be programmed with Failsafe, quickly and easily.</p><p>Quick and extremely stable in performance.</p><p>Precise and smooth servo response.</p><p>Extended range (1.5km-2.5km).</p><p> </p><p><strong>Specifications:</strong></p><p>Operating voltage: 6.0V-13.0V (can handle 3S!)</p><p>Power consumption: 50mA</p><p>Output Power:: 60mW</p><p>Resolution: 3072 (11bit)</p><p>Dimensions: 63.9x48.5x36.5mm</p><p>Version: 2.0</p><p><strong> </strong></p><p><strong>compatiblity:</strong></p><p>JR: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, PX, 9XII, 11XZERO, Turnigy 9x.</p><p>What's in the Box:</p><p>1 x 8-channel transmitter module DJT-II (V2)</p><p>1 x Transmitter Antenna</p></div>FrSky DJT-Junior 2.4GHz Transmitter Telemetry Modulehttps://diydrones.com/forum/topics/frsky-djt-junior-2-4ghz-transmitter-telemetry-module2020-08-09T02:44:47.000Z2020-08-09T02:44:47.000ZChasityWhitehttps://diydrones.com/members/ChasityWhite<div><p><a href="{{#staticFileLink}}7362940474,RESIZE_180x180{{/staticFileLink}}"><img class="align-center" src="{{#staticFileLink}}7362940474,RESIZE_180x180{{/staticFileLink}}" width="160" alt="7362940474?profile=RESIZE_180x180" /></a></p><p>The DJT telemetry transmitter module is a superb choice in case your transmiter is compatable using the Junior modules. (in addition to Turnigy 9x/FlySky 9x/EMAX 9x)</p><p>The Telemetry Radio System produced by <em><strong><a href="https://www.horusrc.com/" target="_blank">FrSky </a></strong></em>offers an additional return link which is used for monitoring the Rx?¡¥s current, poor receiver reception, temperature, location, speed and so forth.</p><p>The module works with both V8-series (non-telemetry) and also the D-Series (telemetry) receivers.</p><p>Features:</p><p>Advanced Continuous Funnel Shifting Technology (ACCST is our advanced tecnology it shifts funnel hundred occasions per second and there's no signal conflicts and interruptions) robust frequency agility.</p><p>Simple to bind and incredibly fast link-up.</p><p>Excellent reboot time.</p><p>True Diversity with two antennas.</p><p>All channels could be programmed with Failsafe, rapidly and simply.</p><p>Fast and very stable in performance.</p><p>Precise and smooth servo response.</p><p>Extended range (1.5km-2.5km).</p><p>Specifications:</p><p>Operating current: 6.0V-13.0V (are designed for 3S!)</p><p>Power consumption: 50mA</p><p>Output Power:: 60mW</p><p>Resolution: 3072 (11bit)</p><p>Dimensions: 63.9x48.5x36.5mm</p><p>Version: 2.</p><p>compatiblity:</p><p>Junior: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, PX, 9XII, 11XZERO, Turnigy 9x.</p><p>What's within the Box:</p><p>1 x 8-funnel transmitter module DJT-II (V2)</p><p>1 x Transmitter Antenna</p></div>FrSky VANTAC Swoop SQ130 BNF 130mmhttps://diydrones.com/forum/topics/frsky-vantac-swoop-sq130-bnf-130mm2020-08-01T12:06:41.000Z2020-08-01T12:06:41.000ZChasityWhitehttps://diydrones.com/members/ChasityWhite<div><p> </p><p>FrSky VANTAC Swoop SQ130 BNF 130mm Wheelbase FPV Racing <a href="https://www.horusrc.com/"><strong><em>RC Drone</em></strong></a>.It is the latest FrSky multirotor to emerge from our team of pilots. No corners were cut when putting together this ready to fly 3-inch machine.</p><p><strong>F.PORT 2.0 PROTOCOL </strong></p><p>Running the latest low-latency F.Port 2.0 connection allows for a clean single signal cable for all your control and telemetry needs, and parameters are fully adjustable through flight controller and Lua Script via F.Port 2.0.</p><p> <a href="{{#staticFileLink}}7175664287,RESIZE_1200x{{/staticFileLink}}"><img class="align-center" src="{{#staticFileLink}}7175664287,RESIZE_710x{{/staticFileLink}}" width="710" alt="7175664287?profile=RESIZE_710x" /></a></p><p><strong>QUALITY, COMPATIBILITY & EXTENDIBILITY</strong></p><p>Swoop SQ130 has a quality and lightweight airframe, the extremely durable construction made with a high-grade carbon fiber frame, ideal for FPV racing. It offers upgradable and alternative equipment, and perfectly works with all FrSky transmitters.</p><p><a href="{{#staticFileLink}}7175668098,RESIZE_1200x{{/staticFileLink}}"><img class="align-center" src="{{#staticFileLink}}7175668098,RESIZE_710x{{/staticFileLink}}" width="710" alt="7175668098?profile=RESIZE_710x" /></a></p><p>Loaded with premium components like the RunCam Robin, Gemfan propellers and extremely powerful motors make this an amazing value. You can be sure you are getting a unique and reliable multirotor with the FrSky Swoop SQ130.</p><p> </p><p><strong>SPECIFICATIONS</strong></p><p>Size: 120*120*30mm</p><p>Weight: 141g (Without battery)</p><p>Receiver: RXSR-FC</p><p>Flight Controller: Omnibus F4 Nano</p><p>VTX: Scout VS600 Black</p><p>VTX Antenna: Rondo 5.8G Antenna</p><p>ESC: Ori32 25A 4in1 Blheli_32 DSHOT</p><p>Motor: 1406 3300KV brushless motors</p><p>Propeller: Gemfan 3052 3 Inch 3-Blade Prop</p><p>Camera: RunCam Robin FPV Camera</p><p>PACKAGE INCLUDED</p><p> </p><p>1x Vantac SQ130 FPV Drone</p><p>1x Manual</p></div>FrSky Taranis X9E 2.4GHz ACCST Transmitterhttps://diydrones.com/forum/topics/frsky-taranis-x9e-2-4ghz-accst-transmitter2020-08-01T12:03:28.000Z2020-08-01T12:03:28.000ZChasityWhitehttps://diydrones.com/members/ChasityWhite<div><p><a href="{{#staticFileLink}}7175645095,RESIZE_584x{{/staticFileLink}}"><img class="align-center" src="{{#staticFileLink}}7175645095,RESIZE_584x{{/staticFileLink}}" width="554" alt="7175645095?profile=RESIZE_584x" /></a></p><p><a href="https://www.horusrc.com/en/transmitters"><strong><em>FrSky transmitter</em></strong></a> X9E 2.4GHz ACCST Transmitter Full CNC Arm with X6R Receiver Carton and Eva Package.The most important aspect for any transmitter is maintaining a rock solid connection with the receiver. FrSky is well known for the frequency hopping ACCST technology taking advantage of the entire 2.4GHz band resulting in excellent range and reliability. FrSky knows many things can affect the connection between Transmitter and receiver so RSSI (receiver signal strength indication) is incorporated into all telemetry receivers. The Taranis transmitter is continually monitoring the reception quality at the aircraft. The Taranis will alert the pilot before signal quality becomes critical. This saves planes and makes the hobby much safer!</p><p><strong>Description:</strong></p><ul><li>Brand Name: FrSky</li><li>Item Name: ACCST Taranis X9E Transmitter Full CNC Arm with X6R Receiver Carton and Eva Package</li><li>Number of Channels: Up to 16 channels</li><li>Operating Voltage Range: 6~15V (2S, 3S Lipos are acceptable)</li><li>Operating Current: 260mA maximum (both RF module and backlit are on)</li><li>Operating Temperature: -10~60℃</li><li>Backlight LCD Screen: 212*64</li><li>Model Memories: 60 (extendable by SD card)</li><li>Compatibility: FrSky X series, D series and V8-II series receivers (plus other receivers if an external module is used)</li><li>Taranis X9E-EU version is only compatible with X series receiver EU version and L series receivers</li></ul><p><strong>Features:</strong></p><ul><li>Quad Ball Bearing Gimbals</li><li>Receiver Match</li><li>Audio Speech Outputs (values, alarms, settings, etc.)</li><li>Antenna Status Detection and Adjustment</li><li>Real-time Flight Data Logging</li><li>Switch Numbers Extendable</li><li>Receiver Signal Strength Indicator (RSSI) Alerts</li><li>Super Low Latency</li><li>Smart Port Supported</li><li>Vibration Alerts</li><li>Bluetooth</li></ul><p>Package Included:</p><ul><li>1 x X9E Transmitter</li><li>1 x X6R Receiver</li><li>1 x EVA Case</li></ul></div>Which is the best Frsky Receiver for your Racing Dronehttps://diydrones.com/forum/topics/which-is-the-best-frsky-receiver-for-your-racing-drone2020-07-23T03:41:06.000Z2020-07-23T03:41:06.000ZChasityWhitehttps://diydrones.com/members/ChasityWhite<div><p>In this article, we are going to dig out the pros and cons of various Frsky Receivers to find out the Best <a href="http://www.horusrc.com/en/receivers">Frsky receiver</a> for your Race Rigs! A receiver is an important and basic component in racing drones as without it the signal sent from Radio or Transmitter cannot be processed by the Flight Controller. But the question arises when choosing a Receiver for your Taranis or Horus Radio as there are plenty of receivers to choose from.</p><p><strong>Frsky XM+</strong></p><p style="text-align:center;"><a href="{{#staticFileLink}}7122509290,RESIZE_584x{{/staticFileLink}}"><img src="{{#staticFileLink}}7122509290,RESIZE_584x{{/staticFileLink}}" width="486" alt="7122509290?profile=RESIZE_584x" /></a></p><p>Frsky XM+ is a Small Size Reciever that Frsky Mainly developed for Mini or Micro Racing quads where the space to allocate the components is challenging. Frsky calls it Ultra Mini Reciever as it only weighs 1.6g and Moreover, it is a Full Range receiver which means it will be identical to the X4R, XSR … Receivers. The receivers feature Dual Antenna which means you have diversity with it. It has an IPEX V4 Antenna which makes it easier to change the antenna in case if it breaks and you don’t need to do any soldering to replace it.</p><p>The major Disadvantage of this FrSky receiver is that it lacks Smart Port which makes it incapable of telemetry. Telemetry is a dual way communication between your Radio and receiver, as you can receive data such as Flight Time, Battery Voltage, Battery Consumption, RSSI, etc From your Flight Controller to the Radio through the Reciever. Even though you can receive the RSSI output from the 16th Channel of the Reciever.</p><p>The receiver is very compact and simple in its design with only three-pin outputs, power, Signal, and Ground which makes it very simple to connect to the Flight Controller. There are no complications in the Connections and It is very easy to configure. Only SBUS Output mode is available in the Reciever with the D16 Mode of the Frsky Radio. A wide range of Input voltage (3.7-10v) is accepted by the receiver But it is recommended to Connect a 5V output from your Flight Controller to it as you don’t need to find any other Battery Eliminator Circuits.</p><p>You can use this receiver in a 5inch build as well as in a 2-inch Build because of its small size factor. It will suit any build where housing space is challenging. This may be the best Frsky receiver for Micro and Whoop Builds where you fly it in Closed Environment because it doesn’t support telemetry.</p><p><strong>Frsky XM</strong></p><p><strong><a href="{{#staticFileLink}}7122465701,RESIZE_584x{{/staticFileLink}}"><img class="align-center" src="{{#staticFileLink}}7122465701,RESIZE_584x{{/staticFileLink}}" width="500" alt="7122465701?profile=RESIZE_584x" /></a></strong></p><p>Frsky XM can be called as the younger brother of Frsky XM+ receivers. It follows a similar design but consuming very little Circuit Board to accommodate the components. It only weighs 1g and it is the lightweight receiver Frsky has ever released. It follows similar features of XM+ Receivers like RSSI output on 16th Channel on it But not a Full range Reciever. Also, it doesn’t have a diversity antenna that you may have to consider flying it in very closed environments. </p><p>The receiver is very tiny that you can place it at your fingertip. It also has only 3 Pins which are Power, Ground, and Signal. It accepts voltage ranging from 3.5-10v where it is recommended to Supply stable 5v to prevent Failsafes. It also follows Sbus output with 16 Channels output and compatible with FRSKY D16 Mode. Frsky XM is best suited for Whoops due to its compact design and doesn’t support telemetry. Hence it may be the best Frsky Receiver for Whoops.</p><p><strong>Frsky XSR</strong></p><p><strong><a href="{{#staticFileLink}}7122492461,RESIZE_710x{{/staticFileLink}}"><img class="align-center" src="{{#staticFileLink}}7122492461,RESIZE_710x{{/staticFileLink}}" width="640" alt="7122492461?profile=RESIZE_710x" /></a></strong></p><p>Frsky XSR is a Full Range, Telemetry Supported (SmartPort) Reciever with PPM and Sbus Outputs. Smart Port telemetry is a big advantage in this receiver so that you can have full telemetry from your Flight Controller. It weighs 3.8g and has a footprint dimension of 26x19.2x5mm. This receiver is not tiny as XM+ or XM and it is not suited for Micro Builds. As long as you have enough space in your Frame to accommodate this receiver, you are good to go. Although you may find a bit challenging to use this receiver in the Frame.</p><p>It supports a wide range of Voltage between 4-10v but it is always recommended to Supply stable 5v from your Flight Controller. The antennas are directly soldered to the receiver and there is no IPEX/IPEX 4 Connector to replace the antenna without soldering it. Perhaps this may be the best Frsky Receiver suited for Mini to Medium-sized quads where you have plenty of Housing Space in the Frame</p><p><strong>Frsky R-XSR</strong></p><p><strong><a href="{{#staticFileLink}}7122523299,RESIZE_930x{{/staticFileLink}}"><img class="align-center" src="{{#staticFileLink}}7122523299,RESIZE_710x{{/staticFileLink}}" width="710" alt="7122523299?profile=RESIZE_710x" /></a></strong></p><p>Frsky R-XSR is a simplified model of XSR Receiver with its features as well it follows the compact design of the XM Reciever series. It is a full range receiver with switchable 16 channel Sbus output and 8 Channel CPPM Output with smart Port Telemetry. Moreover, it is only 1.5g. It is a Full Range receiver with Smart Port Telemetry Supported. It has the IPEX 4 Antenna Connectors, so replacing the antenna won't be a hassle.</p><p>The wiring is the same as of XSR with 5 Pinouts, They are Power, Ground, Signal, CPPM, and Sbus. You may find all the features of XSR Reciever in it and the compact design of XM+ Reciever. It can be called as a combination of these two receivers. The RXSR is very tiny and can be placed in the fingertip. So it can be used in Whoops, Micro, and Mini Drone Categories. Therefore, R-XSR seems to be the Best Frsky Receiver for 5inch Miniquads as well as Micro Quads.</p><p><strong>Comparison</strong></p><p><strong><a href="{{#staticFileLink}}7122540682,RESIZE_930x{{/staticFileLink}}"><img class="align-center" src="{{#staticFileLink}}7122540682,RESIZE_710x{{/staticFileLink}}" width="710" alt="7122540682?profile=RESIZE_710x" /></a></strong></p><p><strong>Conclusion</strong></p><p>We have compared a few of the small size receivers from Frsky that is best suited for Racing Drones. Each one of them has its own pros and cons and best suited in its own scenario. That is why you need to consider the Purpose before buying a receiver. By this time, you might have figured out the best Frsky Receiver for a racing drone, But in fact, it varies from purpose to purpose and we haven’t covered any of the Long Range Receivers from Frsky. We will be discussing that in another Article. I hope this has helped you to choose a Frsky Reciever for your racing Drone.</p></div>